LSJE Dock Fenders
jeffrey likes the first pattern below
can you please run two scenarios for this pattern determining how many feet (pieces) and endcaps we will need for below:
new pattern below all the way to end including shallow water
new pattern below stopping where you are recommending
can you please complete this now as i will be meeting with jee at 4pm and would like to review with him this afternoon
thank you
Greetings Rich.
New pattern going all the way to end takes 114 pieces and 4 corner pieces.
New pattern going stopping were I recommend 95 pieces and 4 corner pieces.
Anna will be scanning a diagram I put together for you.
Thanks
Carlos
Leo just picked up 2 samples to bring to you for your review
Overview of fenders:
C Marine Package 3 in below email from C Marine - i was able to negotiate 29,000 for 156 fenders / end pieces / bolts / washer and shipping Cost per fender = 176.73
Measurements:
10" W x 5" H x 36" L
total coverage for 156 fenders = 1,560" W x 780" H x 5,616" L
Techno Rubber
Style 11181- Grey
Measurements:
5" W x 2" H x 12" L
Cost per Bumper = 13.25
in order for us to achieve 36" we will need 3 of above one foot fenders in addition in order to achieve 10" W (of C Marine) we will need double rows (2x)
5616" Length from C Marine / 12" = 468 1 foot pieces then we must double to achieve same Width = 936 x 13.25 per fender = 12,402 cost before end pieces / bolts / washers
questions:
a) do you like style?
b) is it to firm?
c) is 2" H enough vs 5" H from C Marine
Jeffrey has chosen the "Techno Rubber 11181" for the boat...it was the long one of all 3 choices...do you need these back?
Rich, I would like to see my bumpers in Little St James marina. I would split the difference from 29,000 to 26,500. The package would now be 27,750.00. Let me know if this will work. Mike
attached is email from Michael (C Marine) regarding his desire to sell fenders to LSJE he has now lowered his price from 31,292.41 (30,593.90 + 698.51 shipping) to 29,000.00 to 27,750 (discount of 11.3% which includes fenders/end pieces / bolts and shipping) note this was for original design and included 156 fenders
if we go to new pattern below 27,750 will be reduced by approximately 7,500 for total cost of 20,250
please advise if you still would like to go with new Techno Rubber 11181 fenders or C Marine in addition please confirm we will be using new pattern below thank you
Richard Kahn
HBRK Associates Inc.
575 Lexington Avenue 4th Floor
New York, NY 10022