From: Richard Kahn < Sent: Wednesday, July 1, 2015 7:27 PM To: Jeffrey E. Subject: Fwd: proposal Attachments: scan0002.pdf; Untitled attachment 00049.htm i spoke with januisz and asked why so expensive - JB said =aterial required 150 gallons of epoxy as small sample area used 3 =allons not sure if =ink is correct for product they are using but it is expensive http://aeromarineproducts.com/rock-pebbledeck.htm?gclid=Cj0K=Qjwn86sBRDroPiR0LrSzNYBEiQAzOaSYDPxKoCCDugHUf_BKgGehuUS9ZJTwcsD5bdPwJtBs=aAuYw8P8HAQ JB also said that it is very labor intensive and will take at =east 1 week to complete as they have to remove all stones and sand, =lean then put stones back in along with epoxy please advise if you would like done =nd if so i will attempt to negotiate a better price thank you Richard Kahn HBRK Associates Inc. 575 Lexington =venue 4th Floor New York, NY 10022 tel =12-971-1306 fax 646-350-0954 cell =- Begin forwarded message: From: =/b>Janusz Banasiak < Subject: =/b>Fwd: =roposal Date: =/b>June 30, 2015 at 1:42:19 PM =DT To: =/b>Richard Kahn < Hi Rich, here it =s. Begin forwarded message: EFTA_R1_02149092 EFTA02715912 =omputer. From: Steve Drago < Subject: proposal Date: June 29, 2015 at 3:18:22 PM EDT To: Janusz Banasiak < Cc: Joe Cufferi < <mailto <mailto > > > > Juanusz, sorry it took so long to get =roposal for the past couple of days I had a lot of trouble with my Sincerely Steve =Mhz> 2 EFTA_R1_02149093 EFTA02715913