EFTA01225768

SOFTWARE HOUSE From Tyco Security Products C•CURE 9000 Version 2.50 UM-119 RU Getting Started Guide REVISION R0 EFTA01225768 C•CURE and Software House are registered trademarks of Tyco Security Products. The trademarks, logos, and service marks displayed on this document are registered in the United States [or other countries]. Any misuse of the trademarks is strictly prohibited and Tyco Security Products will aggressively enforce its intellectual property rights to the fullest extent of the law, including pursuit of criminal prosecution wherever necessary. MI trademarks not owned by Tyco Security Products are the property of their respective owners, and are used with permission or allowed under applicable laws. Product offerings and specifications are subject to change without notice. Actual products may vary from photos. Not all products include all features. Availability varies by region; contact your regional sales manager. Software version 250 Document Number: UM-138 Revision: RO Release Date: December 2015 This manual is proprietary information of Software House. Unauthorized reproduction of any portion of this manual is prohibited. The material in this manual is for information purposes only. It is subject to change without notice. Software House assumes no responsibility for incorrect information this manual may contain. O 2015 Tyco Security Products. MI rights reserved. EFTA01225769 Table of Contents Preface 5 How to Use this Manual 6 Finding More Information 7 Conventions 8 Software House Customer Support Center 9 Chapter 1 - Introduction 11 Overview 12 Typical Implementation Process 13 Installing the System 15 Configuring C •CURE 9000 16 Object-oriented Management 17 Event Management 17 Navigating in C•CURE 9000 18 Auto Hide 18 Search Button 18 Configure Button Menu 18 Selecting Objects in a Function Pane 19 Selecting Objects from a Hardware Tree 20 Selecting Options & Tools 21 Finding Objects in the Administration Station 22 Filtering Search Results 23 Recall Query 24 Open Files and Closing Tabs 24 Managing the Function Buttons 25 Hiding the Navigation Pane 27 Chapter 2 - User Interfaces 29 Managing Security Objects 30 Partitions 31 Search 31 Context Menus 32 Status Screens 33 Templates for Security Objects 33 Editors 34 C•CURE 9000 Getting Started Guide 3 EFTA01225770 Dynamic Views 34 Administration Station 36 Accessing the Administration Station 37 Logging In and Logging Out 37 Administration Station Tasks 38 Using Panes 39 Area and Zones Pane 39 Card Formats and Keys Pane 40 Options & Tools Pane 41 Data Views Pane 42 Hardware Pane 43 Personnel Pane 47 Configuration Pane 49 Video Pane 51 General Purpose Interface 52 Basic Object Tasks 54 Creating an Object 54 Creating an Object Template 54 Creating an Object from a Template 55 Editing an Object 56 Using the Actions Button 56 Viewing a List of an Object Type 57 Using the Object List Context Menu 58 Deleting an Object 60 Sorting and Filtering the List of Objects 60 Exporting an Object 61 Showing Associations for an Object 62 Monitoring an Object from the Administration or Monitoring Station 65 Object Selection Dialog Box 67 Monitoring Station 71 Accessing the Monitoring Station 71 Monitoring and Maintaining C •CURE 9000 73 Monitoring Station Viewers 73 External Applications 74 Manual Actions 74 Client Configuration 75 Index 77 4 C•CURE 9000 Getting Started Guide EFTA01225771 Preface The C•CURE 9000 Getting Started Guide is for new and experienced security system users. The manual describes how to start using C•CURE 9000, shows how to locate common functions, and lists typical tasks that you can perform. It also lists the various support resources available from Software House. In this preface How to Use this Manual 6 Finding More Information 7 Conventions 8 Software House Customer Support Center 9 C•CURE 9000 Getting Started Guide Preface 5 EFTA01225772 How to Use this Manual How to Use this Manual This manual includes the following sections. Turn to the appropriate section in this manual for the information you need. Chapter 1: Introduction This chapter provides an overview of the C•CURE 9000 application, its various components, and overview of new features, and a typical implementation process. Chapter 2: User Interfaces This chapter describes the various management and monitoring interfaces available to you, including the Administration Station, the Monitoring Station, and the Client configuration interfaces. 6 Preface C•CURE 9000 Getting Started Guide EFTA01225773 Finding More Information Finding More Information You can access C•CURE 900(1 manuals and online Help for more information about C•CURE 9000. Manuals C•CURE 9000 software manuals are available in Adobe PDF format on the C•CURE 9000 DVD. You can access the manuals if you copy the appropriate PDF files from the C•CURE 9000 Installation DVD English \ Manuals folder. The available C•CURE 9000 and Software House manuals are listed in the C•CURE 9000 Installation and Upgrade Guide, and appear as hyperlinks in the online.pdf file on the C•CURE 9000 DVD English \ Manuals folder. These manuals are also available from the Software House Member Center website Online Help You can access C•CURE 9000 Help by pressing Fl or clicking Help from the menu bar in the Administration/Monitoring Station applications. C•CURE 9000 Getting Started Guide Preface 7 EFTA01225774 Conventions Conventions Ibis manual uses the following text formats and symbols. Convention Meaning Bold T his font indicates screen elements, and also ind tales w hen you should take a direct action in a procedure. Bold font describes one of the folowing items: • A oommand or character to type, or • A button or option on the screen to press, or • A key on the keyboard to press • A screen element or name blue cob( text Indicates a hyperlink toa URL, Ora cross-reference toa figure, table, or section n thls guide. Regular Rafe font Indicates a new term. <text> Indicates a variable. The following items are used to indicate important information. NOTE TIP 0 S Indicates a note. Notes call attention to any item of information that may be of special importance. Indicates an alternate method of performing a task. Indicates a caution. A caution contains information essential to avoid damage to the system. A caution can pertain to hardware or software. Indicates a warning. A warning contains information that advises users that failure to avoid a specific action could result in physical harm to the user or to the hardware. Indicates a danger. A danger contains information that users must know to avoid death or serious injury. 8 Preface C•CURE 9000 Getting Started Guide EFTA01225775 Software House Customer Support Center Software House Customer Support Center Telephone Technical Support During the period of the Agreement, the following guidelines apply: • Software House accepts service calls only from employees of the Systems integrator of Record for the installation associated with the support inquiry. Before Calling Ensure that you: • Are the Dealer of record for this account. • Are certified by Software House for this product. • Have a valid license and current Software Support Agreement (SSA) for the system. • Have your system serial number available. • Have your certification number available. Hours Normal Support Hours Monday through F riday. 8:00 to 8:00 , EST. Except holidays. Emergency Support Hours 24 hours/day, seven days a week, 365 daystyear. Requires Enhanced SSA"7 x2r Standby Telephone Support (emergency) provided to Certified Technicians. For another customers. billable on time and materials basis. Minimum charges apply- See MSRP. Phone For telephone support contact numbers for all reg ions. see C•CURE 9000 Gelling Slatted Guide Preface 9 EFTA01225776 Software House Customer Support Center 10 C•CURE 9000 Getting Started Guide EFTA01225777 Introduction This guide describes how to start using C•CURE 9000, shows how to locate common functions, and lists typical tasks that you can perform. . In this guide: Overview 12 Typical Implementation Process 13 Navigating in C•CURE 9000 18 C•CURE 9000 Getting Started Guide Chapter 1 11 EFTA01225778 Overview Overview C•CURE 9000 is a flexible, object-oriented security and event management system that features a variety of customizable interfaces for maintaining the system, and for monitoring the sites that you want to secure. For additional flexibility, C•CURE 9000 provides an option to display these management and monitoring interfaces in the native languages of the people using the system. C•CURE 9000 provides extensive information management capability using Microsoft SQL Server and Microsoft .NET Framework V45. Its distributed client-server architecture is capable of supporting a large array of clients, controllers, and input devices, including various card readers and cameras. C•CURE 9000 lets you shape your security and event management system to meet your specific requirements, and provides you with the power to quickly respond to evolving security challenges. ■ Object-oriented Management on Page 17 ■ Event Management on Page 17 ■ Typical Implementation Process on Page 13 12 Chapter 1 C•CURE 9000 Getting Started Guide EFTA01225779 Typical Implementation Process Typical Implementation Process Each C•CURE 9000 installation is unique. You should carefully plan how you want to design and implement your security and event management system. Relationships and dependencies between the various elements of the security system managed in C•CURE 9000 often require specific sequences for configuration, import, export, and monitoring. As part of your planning for implementing C•CURE 9000 at your site, consider the general steps listed in Table 1 on Page 13. These are typical tasks. You and your Software House integrator should adapt the details and sequence of your implementation to suit your specific requirements. . Table 1: Typical C•CURE 9000 Implementation Steps Task Description 1 Installing the System on Page 15 C•CURE 9000 provides an automated installation program and installation wizard. 2 License activation The License Interface is used to activate, validate, and manage your C•CURE 9000 software license. For information. see the Licensing chapter of the C•CURE 9000 Installation and Upgrade Guide or the C•CURE 9000 online help. 3 Configure Controllers Configuring security objects are hardware systems that coordinate communication between the C•CURE 9000 server and the system security hardware. You should configure your controllers before you define the security objects that are connected to them. See Hardware Pane on Page 43 for more information on Hardware configuration. 4 Partitions on Page 31 Partitioning allows you to sub-divide your C•CURE 9000 system into separate compartments so that you can manage specified hardware and security objects separately, and assign Operator Privileges to view/edit these objects, while providing limited or no access to objects outside the Partition. 5 Configure readers A Reader is a hardware device that accepts access requests. To make an access request, a person swipes an access card at the reader or types a Personal Identification Number (PIN) at a reader keypad. The card reader scans the information encoded on the card and sends the card data (or any entered PIN numbers) to the controller, which grants or denies access. You can create a Reader for each type of controller in C•CURE 9000 and use the Reader Editor in the C•CURE 9000 Hardware Pane to configure the Reader. 6 Configure card formats Card Formats are used to specify how access cards are interpreted by card readers in C•CURE 9000. You can assign one or more card formats to a reader to specify the types of cards the reader can accept for access requests. The type of card formats you can assign depend on the capabilities of the reader. You configure Card Formats using the Card Format Editor. I Configure doors Doors are security objects in C•CURE 9000 that represent a securable entry or exit, as well as the hardware used to establish access control for that entry or exit. A Door could be configured to include a switch, a lock, a bond sensor, an entrance or exit reader, or a request to exit device. Also, a Door can be configured to control access using timers and schedules, trigger actions based on the state of the Door (open or closed), and support different access methods, such as, reader and keypad. C•CURE 9000 Getting Started Guide Chapter 1 13 EFTA01225780 Typical Implementation Process Typical C•CURE 9000 Implementation Steps (continued) Task Description 8 Configure elevators Access to floors is managed through Elevator control. You configure an elevator or elevator group through the use of buttons that represent fbors with inputs and outputs. You can add elevators to clearances that are used to control which card holders can access the elevators and floors and at what times. The Elevator Editor in C•CURE 9000 lets you create Elevator objects so that you can access floors. You specify the floors. inputs. and outputs associated with the elevator. You can configure an Elevator to work with an a pC. STAR. or ISC controller. 9 Configure schedules In C•CURE 9000. schedulescan be used throughout the system. Schedules are used to enhance oantrolof a variety of system activities, including system backups, event activation, personnel access, and holidays. A Schedule is used to specify Start and End times for any object to which it is attached. For example, separate Schedules can be attached to a Door to determine when: • The Door should be unlocked • A Reader can be used to access the door • A Reader plus a Keypad code can be used to access the door. 10 Configure personnel records Personnel represent the people who access your site as cardholders and as Operators of the C•CURE 9000 software. You use Personnel records to configure their access privileges. Operator privileges, and design and print their access badges. You define Personnel using the Personnel Editor. 11 Set clearances A clearance defines the locations and times that an access card is valid. In C•CURE 9000, you create clearance objects to define access to specific doors and elevators, on specified schedules, and then assign these clearances to individualcardholders, or groupsof cardholders. 12 Configure events A C•CURE 9000 event is used to define the way C•CURE 9000 responds to state changes that occur to objects in the system. You can use events to perform actions when a state change occurs. You can create events that perform simple functions, like unlocking a door, or a complex functions. like arming. disarming, and monitoring an area. You can link an event directly to a single action or you can link it to multiple events and actions. You define Events using the Events Editor. 13 Set operator privileges You must determine who can access C•CURE 9000. and what operations each individual is albwed to perform. To access C•CURE 9000. a person must have a Windows user account on the C•CURE 9000 server and must be configured as a C•CURE 9000 operator. You can define the Privileges that you assign to Operators using the Privilege Editor. This editor lets you specify the objects, programs, reports, Personnel, and actions that Operators can view and use. For example, you can set up some Operators to manage Personnel only, while others are allowed to monitor access admissions and rejections onty. You define Operators using the Operator Editor in the C•CURE 9000 Configuration Pane.. A privilege is a collection of rights to use access control objects such as readers, doors, inputs, outputs, and schedules. 14 Chapter 1 C•CURE 9000 Getting Started Guide EFTA01225781 Typical Implementation Process Typical C•CURE 9000 Implementation Steps (continued) Task Description 14 Configure Badges You can create Badges for Personnel using C•CURE ID. C•CURE ID provides a What You See Is What You Get (WYSIWYG) badge designer that provides complete control over oolor, graphics, text, and backgrounds on both sidesof the badge • Setup your badge printers and configure the badging features you want to use by running Badging Setup from the Options & Tools pane. See Badging Setup fin C•CURE ID help for more information. • Design your Badge Layouts (the way your badges will appear, including portraits. images. signatures, bar codes, magnetic stripes, and biometrics) using the C•CURE ID Badge Designer from the Personnel Pane. • Assign the Badge Layouts to your Personnel, capture portraits, signatures. or fingerprints. and print badges using the Personnel Editor in the Personnel pane. 15 Configure video Video provides comprehensive integration between digital video recorders and C•CURE 9000. You can configure Video Servers, Cameras, Tours, and Views, aswell as CCTV Cameras. Switches. and Protocols. You can also configure Actions in Events for Video and CCTV. You define video objects and actions using the Video Editor. 16 Configure maps You can load and configure a map to unite accesscontrolwith floor plansor other building layout types that represent your facility. C•CURE 9000 allows you to load a CAD drawing and add C•CURE 9000 objects to monitor the state and location of the object. 17 Configure journals, activity logs, and reports The ActivityJournal, often simptycalled the Journal, maintains a record of activity monitored by the system. The Audit Log provides a historyof alloonfiguration changes in the system objectswithin C•CURE 9000. Reports allow you to generate information about any C•CURE 9000 object in a custom format. You can view a Journal of system events in C•CURE 9000 from the Journal View. You can define reports for any object type in C•CURE 9000 using the Report Editor. Installing the System In many cases, C•CURE 9000 is installed and initially configured by an authorized Software House integrator. In addition to installing C•CURE 9000 on a server and one or more clients, the overall installation process can include installing and wiring various hardware devices, including readers, controllers, cameras, and other equipment. Table 2 on Page 15 lists typical installation tasks and documentation that provides relevant guidance. Table 2: Typical Installation Tasks Task Supporting Information Install panels and controllers IS TAR Pro Installation and Configuration Guide IS TAR ex Installation and Configuration Guide Install and connect readers. inputs. and outputs Readers. Inputs. and Outputs (RIO) Guide Install server and client computers Computer vendor and operating system documentation. Install C•CURE 9000 software C•CURE 9000 installation and Upgrade Guide C•CURE 9000 Getting Started Guide Chapter 1 15 EFTA01225782 Typical Implementation Process Table 2: Typical Installation Tasks (continued) Task Supporting Information Lcense C•CURE 9000 C•CURE 9000 Installation and Upgrade Guido C•CURE 9000 online help Configuring C•CURE 9000 After completing the installation and licensing process, you must configure C•CURE 9000 to reflect your security priorities and the specific structure and demands of your site and organization. In most cases, security and system administrators perform the necessary configurations. Each C•CURE 9000 installation is unique. You should carefully plan how you want to design and implement your security and event management system. Relationships and dependencies between the elements of your security system that are managed in C•CURE 9000 often require specific sequences for configuration, import, export, and monitoring. As part of your planning, consider the general steps listed in Table 3 on Page 16 for implementing C•CURE 9000 at your site. These are typical tasks. You and your Software House integrator should adapt the details and sequence of your implementation to suit your specific requirements. Table 3: TypicalC•CURE9000 Implementation Steps Task Supporting Information Configure controllers C•CURE 9000 Hardware Configuration Guide Configure card formats C•CURE 9000 Hardware Configuration Guide Configure readers. C•CURE 9000 Hardware Configuration Guide Configure Inputs and Outputs C•CURE 9000 Hardware Configuration Guide Configure events C•CURE 9000 Software Configuration Guide Configure doors C•CURE 9000 Hardware Configuration Guide Configure elevators C•CURE 9000 Hardware Configuration Guide Configure schedules C•CURE 9000 Software Configuration Guide Configure clearances C•CURE 9000 Personnel Configuration Guide Configure areas and related objects C•CURE 9000 Areas and Zones Guide Configure personnel records C•CURE 9000 Personnel Configuration Guide Configure badging and badge printing C•CURE ID User's Guide Configure Guard Tours C•CURE 9000 Guard Tours Guide 16 Chapter 1 C•CURE 9000 Getting Started Guide EFTA01225783 Typical Implementation Process Typical C•CURE 9000 Implementation Steps (continued) Task Supporting Information Set operator privileges C•CURE 9000 Software Configuration Guide Configure video C•CURE 9000 Video Guide Configure maps C•CURE 9000 Data Views Guide Configure journals, activity logs, and reports C•CURE 9000 System Maintenance Guide C•CURE 9000 Data Views Guide Object-oriented Management C•CURE 9000 manages information as objects. In C•CURE 9000, the term object refers to a collection of definable properties that is saved in a database to describe a particular element of your security and event management system. Examples of objects in C•CURE 9000 include: ■ Access control equipment at your site, such as, readers and controllers ■ Items configured in C•CURE 9000, such as, reports, or import definitions ■ Activities monitored by the system, such as, configuration changes or events ■ Persons who access your site, such as, employees, contractors, and visitors You can build a customized security and event management system that satisfies your current security and operational requirements and modify the system as your requirements evolve. See Managing Security Objects on Page 30 for more information. Event Management An Event is an object that lets you link actions, messages, and time activations into one component. Events are triggered by state changes, such as temperature fluctuations, forced doors, or rejected access requests. C•CURE 9000 manages events using a cause and effect strategy. Anything that C•CURE 9000 can monitor can be used to generate an event, and the event can trigger any action. You can schedule events to occur once or to repeat at specific times. You can configure events that perform simple functions,for example, unlocking a door. You can also configure events for complex functions, for example, arming, disarming, and monitoring an entire area. You can link an event to a single action or link it to multiple events and actions. When you configure an event, you assign it an event priority. Event priorities allow you to rank the importance of a particular event relative to other events in the system. Then, if multiple events occur simultaneously, the system compares event priorities to determine the proper sequence of response. C•CURE 9000 provides eight priority ranges, each containing 25 priority settings, for a total of 200 possible event priorities. See Understanding Events in the C•CURE 9000 Software Configuration Guide for more information. C•CURE 9000 Getting Started Guide Chapter! 17 EFTA01225784 Navigating in C•CURE 9000 Navigating in C•CURE 9000 Use the Navigation pane to access objects and information available in the C•CURE 9000 Administration Station. In the Navigation pane, you can select objects currently available in the system, access various editors that allow you to quickly add hardware and configure new objects, search for current and historical information about your system and site, and change the appearance of the Navigation pane. Figure 1 on Page 18 illustrates a typical Navigation pane. Figure 1: Navigation Pane In the C•CURE 9000Ad ministration Station Navigation towbar •"-- • - Cotalguration RASO MOM Auto Hide Stath ck anode. Enalel r Na. Otani r j iskemerl Wawa roe Neaarlikees 1 Cardinals enters 03 Data Visas I c4 vore mansane omens., 4! cavarlIpTC maims See Hiding the Navigation Pane on Page 27. Search Button See Finding Objects in the Administration Station on Page 22. Configure Button Menu See Managing the Function Buttons on Page 25. ...I _ Auto hide . 0 _ Search baton Search pan* 0 Il e= Cr, puvr Advanced Search button Manage the Nncton buttons g STN Cad Pawn ani ran CI Nu ‘...• 1‘.« SitoM OreWetal nylmrr• CO), ra Pagentl ■ OraaalOinm• Mafia 18 Chapter 1 C•CURE 9000 Getting Started Guide EFTA01225785 Navigating in CCURE 9000 Selecting Objects in a Function Pane The steps required to select an object in the Navigation pane depend on how the objects are presented. Depending on the object class you select, the Navigation pane presents information as follows: • Icons: to access Options & Tools For details, see Selecting Options & Tools on Page 21. • Function panes: to access Configuration objects, Personnel objects, and Data Views For details, see Managing the Function Buttons on Page 25. • Hardware Trees: to access Hardware and Video objects For details, see Selecting Objects from a Hardware Tree on Page 20. Figure 2 on Page 19 illustrates the various ways to access information in the Navigation pane. Figure 2: Access to Objects in the Navigation Pane Options & Tools LkuSUP gi SodsSOD Gtluaf id Lt DisItteLEgast SA" End Erepckn0scal Env. Sobs 4•IN [r eaW it, UgUlap v.so (1 N.s....no. Soh /).^ Ilaip4tha.leOtetb, sy.r.p.,.. Personnel Marl C • iamb Owe Papp-Pim En One IS Saw Ed*. s— Km gpou r Imps Video • t-ets 'dohs Vd.o „1 Spa* awe • a Calareine Saies‘h.PSI La Ts. *vas a"Cin” 2, cCIVStakt.MI MCP Pfeo :era rifiN4 Penn,. lova ors. I ceeca 26'svmpann To Select an Object in a Function Pane 1. Open the Administration Station. For details, see Accessing the Administration Station on Page 37. 2. In the Navigation pane, select the function button for the class of object you want to select. Example: In Figure 2 on Page 19 the Configuration button was selected. 3. From the drop-down menu in the Navigation toolbar, select the type of object you want to select. 4. Search for the object you want to select. Do the following: • In the Selection pane, enter your search criteria. If you do not enter specific criteria, the search returns all saved objects of the selected type. C•CURE 9000 Getting Started Guide Chapter! 19 EFTA01225786 Navigating in C•CURE 9000 • Click the search button. You have the option to display results in a new tab. The search results appear as a dynamic view in the Display pane. 5. To display a pop-up editor to view or modify the object, in the dynamic view, double-click the entry for the object. For more information about managing and monitoring the following in C•CURE 9000, see: ■ Area and Zone objects - C• CURE 9000 Areas and Zones Guide ■ Card Format and Key objects - C• CURE 9000 Personnel Guide ■ Configuration objects - C• CURE 9000 Software Configuration Guide ■ Data Views objects - Data Views Guide ■ Personnel objects - C• CURE 9000 Personnel Guide Selecting Objects from a Hardware Tree To select objects used to manage and monitor hardware, such as card readers or controllers, and video equipment, such as cameras and video servers, select the object from a hardware tree displayed in the Navigation pane. In the tree, objects are represented by various icons. The tree illustrates the hierarchical relationships of the hardware and video equipment managed by your system. You can select objects from the tree, or use a search function to find all objects of a specific type that are present on the tree. The Search function appears as a tab for Hardware (and Video). Click the Search tab to display the Quick and Advanced buttons. Figure 3 on Page 21 illustrates a typical hardware tree. 20 Chapter! C•CURE 9000 Getting Started Guide EFTA01225787 Navigating in C•CURE 9000 Figure 3: Typical Hardware Tree in the Navigation Pane Hardware •kras «emir :IO • Nodose Too I Smith • SS.. Ns • tat ..s4 B% Powniktil • torcrAiere Pow NerAt Con. Pat' 1 • e, as clor••••••••1 • J ete I • 0 Cwt 6,34.tedge le••41 Q Cu-An paxim • moor' ▪ OTC** 1 ECOkOelx1 CO•on•fri ( apnoea Ica ef Arra adbee radInds sire To Select an Object from a Hardware Tree 1. Open the Administration Station. For details, see Accessing the Administration Station on Page 37. 2. In the Navigation pane, select the function button for the class of object you want. Select either Hardware or Video. 3. Do one of the following: • In the hardware tree, double-click the icon representing the object you want to access. For example, you can click the icon for a specific door, elevator, or camera. When you double-click the object, a pop-up editor displays to let you view or modify the name and description of the object. When you select the object and click New, an editor displays allowing you to configure the object. • Search for the object, or multiple objects. To open the search pane, click the Search tab. By default, only the Quick search pane displays. Selecting Options & Tools The Options & Tools pane does not provide a Navigation toolbar nor does it provide the ability to search for objects. Instead, you make selections using the icons displayed vertically in the pane. C•CURE 9000 Getting Started Guide Chapter! 21 EFTA01225788 Navigating in C•CURE 9000 To Select an Object in Options & Tools 1. Open the Administration Station. For details, see Accessing the Administration Station on Page 37. 2. In the Navigation pane, select the Options & Tools button. 3. In the Options Sr Tools pane, click the icon for the type of object you want to select. For a list of objects available in this pane, see Options & Tools Pane on Page 41. A pop-up dialog box or editor displays to let you view and modify the object you selected. Figure 4 on Page 22 illustrates how C•CURE 9000 displays a selection made in Options & Tools. Figure 4: Object Selection In Optbns & Tools Option:: +I. Tool: gal al a rjas Oar SaG Er Cale Got, tab DiGlarGt away fa ,re Gti Googol. MT. Iltj Weida— X isr 411nallmaa. a Gra Gat.. tit GeileflablIbe Gollera teem • • roe 4410I V ca. 1J -an ./J (Cue ma itt af Cam Sao i21 JJ warn Oa. Ilai tl ha arch], 61411Ca. Y hall% ▪ Piso.a.12C0 M1 ..121 ad Gan 0toolia141 sl 1 A Saps 161 GI a Ore . Ili Finding Objects in the Administration Station There are several ways to find objects in the Administration Station. See table for a description. Table 4: Searching Function Function Description Quick Search Displays by default, except for Options and Tools, and it is on a separate tab for Hardware and Video. To perform a Quick Search, enter your search criteria according to the selection of fields provided by default and dick Search .O ' at the top of the pane. If searching Hardware or Video, click the Search tab first to open the Quick Search pane, then enter your search criteria, and dick Search Advanced Search Provides access to a list of existing queries for the current object type, To perform an Advanced Search, dick the Advanced button (if searching Hardware or Video, dick the Search tab, then click the Advanced button). 22 Chapter 1 C•CURE 9000 Getting Started Guide EFTA01225789 Navigating in C•CURE 9000 Searching Function (continued) Function Description Instant Query You may use one of the following options to perform an InstantOu ery for the selected object: 1. Clidanstant Query todisplay theQuery parametersdialog box. On the Query parametersdialog box use the toolbar to create a kst of query aiteria of your choice, or use Browse in the Predefined Query field to select an existing queries of the same type. -or￾1. Click the down-arrow on Instant Query to display the drop-down list and select a subtype of Instant Query if you need a special subtype, and then edit on the Query parameters dialog box, as needed. 2. Click Run to execute the query. Instant Queries cannot be saved, but you can use the Recall Query loon V to open and modify the query content. The Dynamicview wascreated by the query, so you can review and modify the query content when you recall the query. The Instant Query is kept in memory until the dynamicview isdosed. Recap Query Once the query aileria are created, you can click Run to execute the query. The Instant Query cannot be saved, but because the DynamicView wasgenerated from the query, you can review and modify the query content by dicking the Recall Query icon ;0 . New Query Click New Query to open the Query editor and define a new Query. You can save the Query you create, and it will be avaiable in the list of saved Queries. The Options & Tools pane does not provide a search function. The Hardware and Video panes provide the Search function on a separate tab. For details about finding objects in the Options & Tools pane, see Selecting Options & Tools on Page 21. Filtering Search Results If your search returns a large number of results, you can select items that share a specific characteristic by filtering the results. The toolbar in each dynamic view allows you to enable filtering. When you enable filtering, each field in the dynamic view provides options to sort according to the values present in the field. Figure 5 on Page 23 shows a typical dynamic view toolbar with the Filter icon highlighted. Figure 5: DynamIcView Toolbar D %EIRNE). Count II To filter search results, click the Filtering icon. When you enable filtering, the dynamic view displays additional controls that allow you to specify filter criteria. Figure 6 on Page 23 illustrates how the filtering controls appear in a typical dynamic view. Figure 6: Filtering Controls in a DynamicView Ai—i x I vern • 2.30 Oct Me tie blurt) PZ Nam 400 IW Tablit Gomm lAt•0 N0.0 00010,41 Cant Toll t 0 0 C•CURE 9000 Getting Started Guide Chapter! 23 EFTA01225790 Navigating In C•CURE 9000 For details about how to enable and configure filteringsee the Dynamic Views chapter in the C• CURE 9000 Data Views Guide. Recall Query The Recall Query icon on the toolbar allows you to recall the query that was used to create the current list of objects retrieved by the view. Click the icon to recall the query, open the query parameters screen, and see the parameters and values that generated the list. On the parameters screen you may click the browse button to change to a different saved query from the database or click Modify to change the content of the query. Click Run to send the request to the server with the modified query content to retrieve a new list of objects to display in the view. Figure 7: ClIck Recall Query to Display the Query That Created the View Recall Quay con tadoll tat* U. Serve," Option, wn •• h••• fink GO..7 Ilte•MI DTI •••,,, tome Open Files and Closing Tabs On the far right corner of the dynamic view screen is a small arrow, Open Files. Click this icon to display a list of the tabs that are currently open. Select one from the list to activate that tab in the dynamic view. 24 Chapter! C•CURE 9000 Getting Started Guide EFTA01225791 Navigating in C•CURE 9000 Figure 8: Dispiaya List of Open Tabs Open Files displays a list of open tabs. - nr al be beach c oxen:oral% Ase tqts :r•toit bVia <troMer CAR Pesky Nor Penni Two (••••lisialein 11,0•••Pgrai ratty, Por woad t Stele codko tenet A•n To close any of the tabs, right click on a tab and select one of the close options from the context menu. Figure 9: Close Open Tabs • Hrednarehas 1up isTAR Input Cbse " yin • Z [22 orgj'Ir tO. CloseligrabsbA this nr ; r to otovp by hyre Close Al Tabs Poses the abr. lab] Managing the Function Buttons You can change the way that function buttons appear in the Administration Station. By default, the function buttons appear as accordion tabs in the Navigation pane. C•CURE 9000 provides settings that let you mange or hide the buttons as needed. Example: To better view a large hardware tree, you may choose to hide some or all of the function buttons you are not accessing at the time. You can do any of the following: • Show more or fewer buttons • Change the order in which the buttons appear • Add or remove buttons To Show More or Fewer Buttons 1. In the Navigation tray at the bottom of the Navigation pane, click the configure icon: 2. From the pop-up menu, select one of the following: • Show More Buttons • Show Fewer Buttons Figure 10 on Page 26 shows the menu that presents button display options. C•CURE 9000 Getting Started Guide Chapter 1 25 EFTA01225792 Navigating in C•CURE 9000 Figura 10: Function Button Display Options Options & Tools e Areas and Zones di Card Formats and Keys Data Views Video Heselware ConfiguntIon • 1-hcAv More CkAtcns * Show Fewer IkAtons lity_calko Poo options... Add o Remove Allons When you show fewer buttons, buttons are hidden sequentially from the bottom of the stack, and are displayed as icons in the Navigation tray. When you show more buttons, all hidden buttons are displayed in the Navigation pane. To Change the Order in Which the Buttons Appear 1. In the Navigation tray at the bottom of the Navigation pane, click the configure icon:1 2. From the pop-up menu, select Navigation Pane Options. The Navigation Pane Options dialog box displays, as shown in Figure 11 on Page 26. The dialog box lists the current button display sequence, from top to bottom. Only buttons currently visible in the Navigation pane are selected. Figure 11: Navigation Pane Options Norwegian Pane Uptown I:3 Disko !Aeons h dos orde rEa Ateas erd 2coes 9 cadromuxunireys Oats 9 Moo OK none pr.+ Use the vertical scroll bar to view all of the options and then select the button you want to move, and do either of the following: • To move the button up, click Move Up. • To move the button down, click Move Down. 3. Click OK. NOTE Selecting a check box in the Navigation Pane Options dialog box displays the button in the Navigation pane. Clearing the check box selection removes the button and the icon from the Navigation pane. 26 Chapter 1 C•CURE 9000 Getting Started Guide EFTA01225793 Navigating in C•CURE 9000 To Add or Remove Buttons 1. In the Navigation tray at the bottom of the Navigation pane, click the configure icon: 2. From the pop-up menu, select Add or Remove Buttons. A menu displays the list of function buttons. The icons representing visible buttons are highlighted. Figure 12 on Page 27 shows the menu. Figure 12: Menu for Adding or Removing Buttons aptors• Tat Mused ban 1 Card Haab isol ran Dat•Vilein olk Medan a Peened al&sea Fumes, Meta& • , • sit Afro reset NW* 14•volo‘Pare Optbv... a q.v.. is Area allow JudFo'a&dM), 0Del•Vs4 Wro Pewnsl ■ Gettig heron Padua 3. Do one of the following • To add a button, click the button you want to add. • To remove a button, click the button you want to remove. Adding a button displays the button in the Navigation pane. Removing a button removes it from the Navigation pane. In addition the removed button icon does not display in the Navigation tray. NOTE You can also add a button to, or remove a button from, the Navigation Pane by selecting or deselecting the check box in the Navigation Pane Options dialog box. See Figure 11 on Page 26. Hiding the Navigation Pane In some instances, you may want to hide the Navigation pane so that you can use the entire computer screen to view an editor or information in the Display pane. To gain additional viewing area, you can use Auto Hide to temporarily hide the Navigation pane. To Temporarily Hide the Navigation Pane In the Navigation pane, click the Auto Hide icon: Ill The Auto Hide icon reverses direction and the Navigation pane retracts to the left side of the C•CURE 9000 window. A navigation tab remains visible on the left side of the window so you can open it without the function buttons and use its search capabilities. C•CURE 9000 Getting Started Guide Chapter 1 27 EFTA01225794 Navigating in C•CURE 9000 Figure 13: Navigation pane Colapsed (left) and Expanded without Function Buttons (right) TM Navigation pant is collapsed in this tab Click hale to ("splay the pane without function buttons evocator help /r personnel x vows - Aker 2, D T, C C O CD 0_ Drag columns to grout Na Blanda. Gaye Hamxrica, Daryl Alsworth. Lame Rot Rogers Bates, Warren Writeis, Russel Smith. Samantha Germaine.Andiea Wood. Ted T %meson, Has Slumpscet Marge p foully. Tom Vied, ITI.Anocemous Voila Temperate LI Na Smith Per3onnel Type fest Name Leal Name Mdde Nairn Horne 17 [Tracked In lemolate Advanced ■ To display the Navigation pane with the function buttons, click the Auto Hide icon E. The icon reverses direction and opens the Navigation pane. ■ To display only the Navigation pane, without the function buttons, click in the tab area (the collapsed pane) on the left. Only the pane displays, as shown previously in Figure 13 on Page 28. 28 Chapter 1 C•CURE 9000 Getting Started Guide EFTA01225795 2 User Interfaces This chapter describes the various management and monitoring interfaces available to you including the Administration Station, the Monitoring Station, the Client Configuration, and the License interface. This chapter contains: Managing Security Objects 30 Partitions 31 Administration Station 36 Accessing the Administration Station 37 Administration Station Tasks 38 Using Panes 39 Basic Object Tasks 54 Monitoring Station 71 Client Configuration 75 C•CURE 9000 Getting Started Guide Chapter 2 29 EFTA01225796 Managing Security Objects Managing Security Objects C•CURE 9000 features a variety of user interfaces that you can use to manage your C•CURE 9000 server and clients, configure your security and event management system, and monitor your site. This section describes the various management and monitoring interfaces available to you, including: Table 5: Managing and Monitoring Interfaces License Use this interface to activate. validate. and manage your C•CURE9000 software license. The License and Client Configuration applications feature an interface that presents information and access to application functionson multiple screens, presented asa seriesof selectable tabs. For information, see the Licensing chapter of the C•CURE 9000 Insiagation and Upgrade Guide or the C•CURE 9000 License Online help. Administration Station Use this interface toconfigure administrative functions, including those that control the appearance and optionsavailable n the Monitoring Station. You can customize the appearance of this interface to meet your specific requirements. Access to functions on the Administration Station depends on your C•CURE 9000 access permissions. See Administration Station on Page 36. Monitoring Station Use this interface to monitor your site. The Monitoring Station allows security personnel to monitor various security events and inputs. You can customize this interface for individual operators. See Monitoring Station on Page 71. Client Configuration Use this interface to manage the connection of dients to the C•CURE9000 server, including changing servers and network ports. See ClientConfiguration on Page 75. The Administration Station and the Monitoring Station each present information and functions in a multi-pane window that features persistent viewing and navigation panes, multiple toolbars, a link to online help, and extensive use of icons to access and manage information in the system. The Monitoring Station interface allows for extensive customization. System administrators can create custom monitoring interfaces to suit the needs of various system operators. 30 Chapter 2 C•CURE 9000 Getting Started Guide EFTA01225797 Par MCI'S Partitions The Partition function (Partitioning), in conjunction with the Privileges and Operator functions, allows you to create different sub-divisions, or Partitions, for your C•CURE 9000 system and to separate security objects into these different partitions for both creation and viewing. Operators can be allowed access to, or limited from accessing, individual security objects associated with a Partition. If you have more than one business or department, or multiple buildings on your site, you may need to segment databases of Personnel and Hardware so that they can be managed or monitored independently without setting up multiple security systems. In a partitioned system, you can group Personnel, security objects, hardware, and reports so they can be managed by appropriate Operators, without losing the advantages of central monitoring and administration of the system. Example: If you had a department building and you wanted it monitored by a dedicated security staff, Partitioning would let you organize the security objects, such as, Clearances and Personnel in a Partition that department staff could use without giving them access to security objects outside of their Partition. Partitioning allows C•CURE 9000 to support customer models such as multi-tenant facilities and multi-building campuses. The New Object Partition setting in the Administration Workstation Navigation pane determines the Partition in which an Operator can create objects. MI C•CURE 9000 security objects can be partitioned except ■ Time Zones ■ Logical Elevator Floors (The Inputs/Outputs controlling the elevator buttons can be partitioned so access to the physical elevator floors can be managed through Partitions.) ■ Digital Certificates ■ System Variables ■ Backup and Restore ■ Log Format Objects ■ CCTV Protocols ■ Event Viewer and other objects dragged on top of the Application Layout For more information on Partitions, see the chapter "Partition" in the C•CURE 9000 Software Configuration Guide. Search C•CURE 9000 lets you search for objects saved in the system and filter the search results. You can perform a Quick Search using default search criteria or perform an Advanced Search, with three options: • Run an existing query (either system pre-defined or user-created • Run an Instant Query (see Finding Objects in the Administration Station on Page 22). • Create a New Query and run it C•CURE 9000 Getting Started Guide Chapter 2 31 EFTA01225798 Pat These options are shown (left to right) in Figure 14 on Page 32. Existing Queries Existing Queries, both pre-defined and user-created, allow you to use the pre-configured search criteria "as is" or modify them to search for objects in C•CURE 9000 databases. You can use the existing Queries as needed. Instant Queries Instant Query allows you to select one of the Query subtypes from the drop-down list, and on the next screen, create your own temporary Query. Then click Run to execute the Query. The results from both existing and Instant Queries display in the Dynamic View. Instant Queries cannot be saved; however, if you click the Recall Query icon ai on the Dynamic View screen you can then modify the content of the Instant Query used to create the view. For more information, see Recall Query on Page 24. For more information on Queries, see Finding Objects in the Administration Station on Page 22 or C•CURE 9000 online help. New Query Click New Query to open the Query editor and define a new Query. You can save the Query you create, and it will be available in the list of saved Queries. Figure 14: QueryOelbas ir.Ctiot roux., Was • S ieal la son. l P.* realealherel• CoOkrto Sc.* C ...owl ••• :am ,,•, Pelona, lanterns Mal ?AN P.sonviCiairest aldc - ....0,4•hnovoi newt.,if Coo ton C6lect•etticnOsfat* • USII AO•rni4 I Pentenadt We hricerolisasd mif Cloq I￾rattan. C•Idull • CO? Running a query (existing query or instant query) is the first step of filtering your data. Once. the dynamic view is created (with the data selected by the query) you can continue organizing your search results to suit your requirements by using the filtering feature in the Dynamic view. The filter can be enabled or disabled. Even when disabled, the Dynamic view let you sort records in ascending or descending order by one of the displayed fields. Context Menus C•CURE 9000 provides context menus that allow you to operate on any data object in C•CURE 9000. To display a context menu, in the dynamic view that lists the object, right-click the object listing. Figure 15 on Page 33 shows a typical context menu; in this case, presenting options for a selected personnel record. 32 Chapter 2 C•CURE 9000 Getting Started Guide EFTA01225799 Figure 15: TypicalC•CURE9000oontextmenu. a Edit Oebte Set erccect, it Pater"o toad waned Peettets... Rid m /1St teµ.. a Chace perbben Gime Persernel qkk moo.. In most cases, the context menu allows you to delete or edit the object. Some menus provide additional options. The options available to you depend on your active privileges. Depending on the menu and your active access privileges, you might be able to modify the access that other users have to the object. Privileges are usually set by the system administrator. Status Screens Some operations in C•CURE 9000 provide a status screen. The screen informs you of the progress or success of the operation. Depending on the operation, status screens provide you with various options. Typically, a status screen lets you print or mail the result. In some cases, the screen indicates if errors occurred during the process and provides the location of the error logs. Figure 16 on Page 33 illustrates a typical status screen. Figure 16: Typical Status Screen - catty ache.. : ewe ma: 'at ceneltled nth may al an date> 403 PM , .,m, SOW 0010ble • MOO 04 4/25284 %abort* omit floated • ',Lemberg mew:bleier-led • 91 ..o; Fie Mn • C Pinto Fleadboxe HousthSIMISytteralrexeCadickkiskg,rd Repeal Recut Fie Mae • CAPtcgre FleatSolbist HouKAS\ VHSysiteAkkopoTadHoldeis spubdml cc Peed Ems Templates for Security Objects C•CURE 9000 allows you to modify the default editor-provided settings for a data object and save it as a unique template. The template retains your custom settings. You can use the template to create additional objects in the system. You can create multiple templates for the same object type. Using templates can save time when configuring multiple instances of the same object type —for example, a personnel record, a door, or a controller. See Creating an Object Template on Page 54 for an example of creating a Template for an object. C•CURE 9000 Getting Started Guide Chapter 2 33 EFTA01225800 Partitions Editors For each object listed in a dynamic view, you can open an editor to view and modify object characteristics. An editor appears as a multi-tabbed interface that allows you to create, modify, and save objects in the application. You can also use editors to create templates. Object templates let you create multiple objects that share similar characteristics. Figure 17 on Page 34 illustrates a typical C•CURE 9000 editor. Figure 17: TypicalC•CURE 9000 Editor Isom lam. U ..... _ ••••• Editors provide a field for a name and a description. You assign each object a name that is unique within C•CURE 9000. The description field allows you to communicate information about the object to other users of the system. Dynamic Views Dynamic Views present a list of C•CURE 9000 objects in a single screen that lets you monitor, modify, or delete any object in the view. Your changes are saved directly to the C•CURE 9000 database. Figure 18 on Page 35 shows a typical dynamic view. 34 Chapter 2 C•CURE 9000 Getting Started Guide EFTA01225801 Partitions Figure 18: Typical Dynamic View In C•CURE 9000 kaAwell« w.• I:I DVS CAthuses Et, Fbr A KC [orate, it Peke LCD mes:ay Set I.2 Ccratifive PAAAI)ef Si A 1, ecCtavradi CAA( Nutt CbuceoClAiet I rj CbAcA>o Amer: Colvin:a Dom ▪ DMA." rli was Fe ova. MASA N ADA Arnolt2a Denim Penecntleme 3.31,*(ctet CLA.ACoatilla Deal 3.3bAg, CLAALArti2a CAW Dor P..owns2SH:. ArAALAndl NW/ Dor Da: AAA &A WA. Nu.? Anal UAW Und.ICatil CAW In any dynamic view, the Date/Times fields are displayed in the client's local time, and you can group, sort, and filter the information to organize and arrange it as needed. You can move, display, or hide fields at will. As your requirements change, you can change the dynamic view. Each object type provides a default dynamic view. You can create multiple, customized dynamic views for every type of data object in C•CURE 9000 and then set one of your custom views as the default view for that object type. You can open multiple dynamic views in a single window. Each viewer appears as a tab at the top of the window. Each tab displays the name of the object type and an icon reserved for the object type. You can display the dynamic views for specific objects of the same type in separate tabs in the same window. You can print from a dynamic view at any time. For more information about creating and using dynamic views, see the C•CURE 9000 Data Views Guide. C•CURE 9000 Getting Started Guide Chapter 2 35 EFTA01225802 Administration Station Administration Station The Administration Station lets you manage and customize C•CURE 9000 functions, objects, and screens, including the appearance of the Monitoring Station. Figure 19 on Page 36 shows the default Administration Station screen that opens before any information is presented in the Display Pane. For details on the Options & Tools pane, refer to Options & Tools Pane on Page 41. To start the Administration Station, see Accessing the Administration Station on Page 37. Figure 19: C•CURE9000Administration Station Online Help and Fun:tic_ SMu Options 8, Tools ft 0) 0.0 .ii , Cordrstable4C05 SY0.0.0e ci [MU. den p0-00 Lemed ••0,).0 ItAnfre Display wtax arliT171 1 M50 iNordimOtalther01,20.1000/004 • You access system functions and information by selecting objects in the Navigation pane. Depending on your selections, system information can appear in a dynamic view in the Display pane or in pop-up editors and dialog boxes. For details, see Navigating in C•CURE 9000 on Page 18. 36 Chapter 2 C•CURE 9000 Getting Started Guide EFTA01225803 Accessing the Administration Station Accessing the Administration Station To access the C•CURE 9000 Administration Station you must have a valid C•CURE 9000 license. For details about validating and monitoring your license, see the Licensing chapter of the C•CURE 9000 Installation and Upgrade Guide. 1. You access the Administration Station from a C•CURE 9000 client. To access the Administration Station, the C•CURE 9000 server must be running, the C•CURE 9000 client must be connected to the server, and the C•CURE 9000 drivers must be running. 2. The C•CURE 9000 installer creates a desktop icon that you can use to open the Administration Station. You can also use the Windows Start menu. C•CURE 9000 supports single sign-on and uses your Windows login to authenticate you in C•CURE 9000. Your ability to access the Administration Station, and all its functions depends on the access privileges granted by the system administrator. See Logging In and Logging Out on Page 37. If you do not have sufficient privilege to open the Administration Station, you cannot access it. In C•CURE 9000, privileges can be set at the object level. If you cannot access a function or field in the Administration Station, it may be due to the access privileges associated with the user identity you specified during login. Logging In and Logging Out C•CURE 9000 uses your Windows account log in to authenticate you as a C•CURE 9000 Operator. If your Windows account is correctly configured in your Operator profile, you are automatically logged in when you run the C•CURE 9000 Administration Station application. Using Panes on Page 39 describes the use of the navigation panes in the Administration Station. If you are not logged on when you run the client application, it indicates that your Operator profile is not correct, or is missing. Talk to your C•CURE 9000 administrator to correct the profile. To Log In 1. Click on the C•CURE 9000 Administration Station icon II on your desktop, or locate the C•CURE 9000 Administration Station in Start>All Programs>Software House>C•CURE 9000>Administration Station. 2. If you are logged in to a Windows account that has Operator access to C•CURE 9000, you are automatically logged in when you start the Administration Station client application. To Log Out L. Click to exit the C•CURE 9000 Administration Station. 2. The C•CURE 9000 Administration Station closes. C•CURE 9000 Getting Started Guide Chapter 2 37 EFTA01225804 Administration Station Tasks Administration Station Tasks The C•CURE 9000 Administration Station provides a variety of information and functions to implement the system following installation, and to modify C•CURE 9000 to meet your evolving security requirements afterwards. Use the Administration Station to: ■ Configure various objects that control system behavior and appearance - Configuring C•CURE 9000 on Page 16 ■ Set certain system defaults through system variables - Data Views Pane on Page 42 ■ Add system operators, and set access privilege - Configuration Pane on Page 49 ■ Put various access control devices, including controllers, under C•CURE 9000 control - Hardware Pane on Page 43 ■ Create partitions for the system, assign objects to the partitions, and use privileges to permit or limit operator access to objects in a partition - Configuration Pane on Page 49 ■ Incorporate cameras and video servers into the system - Video Pane on Page 51 ■ Configure and maintain personnel records - Personnel Pane on Page 47 ■ Design badges - Personnel Pane on Page 47 ■ Configure system logging, backup, and encryption - Options & Tools Pane on Page 41 ■ Create and run Reports - Data Views Pane on Page 42 ■ Monitor system settings and performance Options & Tools Pane on Page 41 ■ Customize the Monitoring Station interface for various system operators - Data Views Pane on Page 42 38 Chapter 2 C•CURE 9000 Getting Started Guide EFTA01225805 Using Panes Using Panes In the Administration Station, the various buttons at the bottom of the Navigation pane provide access to more functions and information you need to manage, maintain, and modify your C•CURE 9000 installation. For more information about the buttons on the Navigation pane, see: • Area and Zones Pane on Page 39 • Card Formats and Keys Pane on Page 40 • Options Sr Tools Pane on Page 41 • Data Views Pane on Page 42 • Hardware Pane on Page 43 • Personnel Pane on Page 47 • Configuration Pane on Page 49 • Video Pane on Page 51 Area and Zones Pane To configure physical locations in C•CURE 9000 for personnel access control and monitoring or to configure them as secure zones protected by alarms use functions available on the Area and Zones pane. This pane also lets you configure a function that permits commands entered on a reader keypad to initiate panel events. Access these functions from the drop-down menu in the Navigation toolbar. See the C• CURE 9000 Areas and Zones Guide for more information. Figure 20 on Page 39 shows the drop-down menu for the Area and Zones pane. Figure 20: Area and Zones Options In C•CURE 9000 M Nen liSTAR Area L .I - Camod Group Quick STAR Intrusion Zone typed Commend Table 6 on Page 39 lists the functions you can access on the Area and Zones pane. Table 6: Area and Zones Pane Options Function Description Carpool Group Allows you to organize personnel into Carpool Groups permitted to park in designated Carpool Areas and to move these Group members in/out of the Areas based on a driver's Credential. This licensed feature also supports the monitoring of vehicle counts for parking lot occupancy restrictions. C•CURE 9000 Getting Started Guide Chapter 2 39 EFTA01225806 Using Panes Table 6: Area and Zones Pane Options (continued) Function Description STAR Cluster Area An Area represents a physical region and can be used to control and monitor access. Areas are used with Antipassback—both Regular and Timed—and with Occupancy Restrictions and also provide the capability to track Personnel. In addition Triggerscan be defined to link the Area's status (sudi as when an AntipassbaddOccupancy violation occurs) to Events whose Actions can sound an alarm or send an e-mai or page, for example. STAR Intrusion Zone An iSTAR Intrusion Zone is a user-defined group of Doors and Inputs on the same localControler that delineates a physical area monitored for alarms—thus protecting that area. Inputs such as motion dated= and glass break sensors monitor security inside the zone. while the Doors define the entrance and exit points for the zone. In addition Triggerscan be defined to link the Intrusion Zone's mode and status (suds as when a zone is violated) to Events whose Actions can sound an alarm or send an e-mal or page, for example. Keypad Command A Keypad Command is a unique nine-digit number that authorized personnel can enter on the keypads of Readers (RMs) connected to iSTAR Controllers. These Keypad Commands can be used to activate Panel Events that initiate: Intrusion Zone Actions, such as arming, disarming, and toggling Intrusion Zones. System-wide actions that can controlobjects in the host and other iSTAR dusters. Local target actions, such as lodting/unlocking a door by entering a keypad command on its keypad. Card Formats and Keys Pane To configure Card Formats for Readers in C•CURE 9000 and Encryption keys for programming MIFARE Smart Cards, use the functions available on the Card Formats and Keys pane. Access these functions from the drop-down menu in the Navigation toolbar. See the C•CURE 9000 Card Formats and Smart Card Keys Guide for more information. Figure 21 on Page 40 shows the drop-down menu for the Card Formats and Keys pane. Figure 21: Card Formatsand Keys Options In C•CURE 9000 Table 7 on Page 40 lists the functions you can access on the Card Formats and Keys pane. Table 7: Card Formats and Keys Pane Options Function Description Card Format Card Formats specify the arrangement of data that card readers expect from accesscards presented to the reader.This information isgeneraly a string of numbers. To enable a controler to interpret the numerical string, you must define a card format for C•CURE 9000 todownload to the controler that manages that reader. You use the Card Format Editor to define the format and characteristicsof the Card Formats used in your system. Smart Card Key A Smart Card key is used to securely read and write data toa Smart Card and to program Smart Card readers to read cards that are encoded with this Smart Card key. Smart Card Keys are encrypted in the C•CURE 9000 database after you create them. 40 Chapter 2 C•CURE 9000 Getting Started Guide EFTA01225807 Using Panes Options & Tools Pane Functions available on the Options & Tools pane allow you to maintain and monitor C•CURE 9000. Access these functions through icons displayed in the pane. Table 8 on Page 41 lists the functions you can access on the Options and Tools pane. Table 8: Options and Tools Pane Options Icon Function Description Audit Log The Audit Log provides a history of all oonfig uration changes in the system objects with in C•CURE 9000. Changes are recorded as they occur and a record of each change is stored in the Audit Database. [7 11I Badge Setup Badge Setup provides access to the C•CURE ID Setup function. C•CURE ID Setup lets you oonfigure the settings for data, printers, capture devices, and badge design. Each of these settings affects the way you use the V application to design badges, store badge data, print badges. and capture images or biometric data. F-1." Customer Field Labels You can change the labels for the Personnel Customer fields (Textt to Text 25 and Intl to I nt9. etc.) using the Customer Field Labels editor. th Data Import/Export History Import/Export History allows you to view a history of imports into C•CURE 9000. You can also use the tool to view previous exports from C•CURE 9000. In C•C UR E 9000, an import is a software object that is configured with a unique name and specifies a collection of records to be imported into C•CURE 9000. Exports in C•CURE 9000 are objects that allow you to define a collection of records to be exported to an externaldata base k li Email To send email from the local machine to a recipient or a group of recipients. 2 Encryption Options Encryption Options allows you to select the key management mode used for communication between C•CURE 9000 and STAR controllers configured in the system. Depending on the mode you select, you may need to generate digitalcertificates. _ — _ _ Event Priorities Event Priority allows you to rank the importance of a particular event relative to other events in the system. If eventsoccur simultaneously, Event Priorities enable the system to execute responses in the proper sequence. C•CURE 9000 provides130 priority ranges, each containing 25 priority settings, for a total of 2000 possible event priorities. For each priority range, you can change the label and color used to display the event priority on the Monitoring Station. ICU You can launch the STAR Configuration Utility from the Options and Tools pane. 1) 1 Journal The ActivityJournal, often simptycalled the Journal, maintains a record of activity monitored by the system. Viewing this historycan provide valuable information about your facility and your C•CURE 9000 installation. It ] Log Backup Mgmt. Log Backup Management allows you to restore backups of log messages to the Audit Log and the Activity Journal, remove previously restored files from the database, and delete backup files. C•CURE 9000 Getting Started Guide Chapter 2 41 EFTA01225808 Using Panes Table 8: Options and Tools Pane Options (continued) Icon Function Description 4 Log Volume Mg mt. Log Volume Management allows you to back up selected portions of the Audit Log or the Activity Log at any time. The Log Volume Management function allows you to select and then back up or delete from the database specific volumes in the logs at any time. i71,< A Mode Maintenance Allows you to limit the information that displays for securityobjects in the C•CURE 9000 database. Thisgives you the ability to manage and fitter false alarms from normal monitoring of security points or equipment that is being installed. tested, or serviced. Activity and/or Events from objects in Maintenance Mode are recorded and identified accordingly in the historicalJournal. Multilingual User Interface Editor The C•CURE 9000 Multilingual User Interface Editor allows anyone with appropriate access permissions to modify C•CURE 9000 screens and system messages to appear in a language other than English. The ability to view a localized version of the C•CURE 9000 user interface depends on the availability of localized C•CURE 9000 resources and, within the computer running the C•CURE 9000 client, on setting the appropriate regional options for the individual instance of Microsoft Windows. — Y — 1.A System Backup System Backup launches an editor that allows you to configure how C•CURE 9000 performs a backup of the system databases, including the configuration database and the current audit log and current journal (activity log). You can run a system backup at any time. The system saves the backup to a default location you specify using a system variable. 4 System Variables System variables define specific system settings across your C•CURE 9000 installation. Updating system variables lets you quickly modify system behavior and certain user options. Changes to system variables occur immediately and do not require a system restart to take effect. Data Views Pane To configure how C•CURE. 9000 presents information, including the user interface for the C•CURE. 9000 Monitoring Station, use functions available on the Data Views pane. The Data Views pane also lets you configure reporting functions that determine how to retrieve and present information on any object in C•CURE. 9000. Access these objects from the drop-down menu in the Navigation toolbar. Figure 22 on Page 42 shows the drop-down menu for the Data Views pane. Figure 22: Data VIEWS C•CURE 9000 Dew Legacy Maps Maps Query Repot Report Form Report Resuk Table 9 on Page 43 lists the objects you can access on the Data Views pane. 42 Chapter 2 C•CURE 9000 Getting Started Guide EFTA01225809 Using Panes Table 9: Data View Options Object Description Application Layout A customded arrangement of C•CURE 9000 application components that can be assigned toan Operator. When an Operator opens the C•CURE 9000 Monitoring Station application. the Application Layout assigned to the Operator determines how application components are arranged on the screen. Dynamc View Dynamic Views display information about C•CURE 9000 objects in a format that lets you edit delete. update. or monitor the object and print from the dynamic view. Grouping. sorting. and flaring capabilitiesallow you to organize and focus on the data you need. You can open the Dynamic View editor to adjust the settings fora dynamic view. based on what you want the view to display and how you want the information on the view to be shown. Maps and Legacy Maps You can load and configure a map to unite access control with floor plans or other building layout types that represent your facility. C•CURE 9000 allowsyou to load a CAD drawing and add C•CURE 9000 objects to monitor the object's state and location. The Map Editor lets you display a flexor site plan to place icons and monitor the state of security objects. You can view both Maps (new format starting with version 2.30) and Legacy Maps (map format prior to version 2.30). Query A CCURE 9000 query is used to search the C•CURE 9000 database for objects. and alowsyou to filter the search results. Report Reports provide you with the ability to create detaled reports about any C•CURE 9000 object. The Report editor in C•CURE 9000 lets you ante reports about C•CURE 9000 objects. You can choose the objects and fields to include h your report, design the layout of the report. preview the layout of the report, and save the report from the Reporteditor. Report Form A Report Form is a placeholder for a report layout with a report header/footer and page header/footer information. You can design a single Report Form and use it with multiple reports so that your reports have a consistent appearance. A Report Form can be used with any Report object. Its layout parameters are merged with a report's layout to form the final output that you can displayer print. By running a report with a different report form. you can change the appearance of the report, without having to edit the report layout. Report Result A Report Result is used to store a completed report as a document with the report query and the set of report parameters that were used to generate the report. When you run a report, you can save the generated view as a new Report Result object. You can keep the report result as long as it is needed. and delete it when it is no longer needed. A Report Result is also generated if a Report is executed by a sdieduled action. Hardware Pane To put various access control devices under C•CURE 9000 control, use functions available on the Hardware pane. Also use this pane to create digital certificates required to allow encrypted communication between device controllers and the C•CURE 9000 host computer. Access thee functions from the drop-down menu in the Navigation toolbar. Hardware Objects Organized by Class Classes of hardware objects, such as iSTAR clusters, apC Comm Ports, and SC controllers, are parent objects. They are created within the facility folder in the hardware tree and must be created before the child objects in their respective class, such as inputs, outputs, readers, boards, elevators, and doors. With iSTAR objects, the iSTAR cluster must be created first before adding one or more child iSTAR controller object(s). Within the cluster, you may configure a controller to be the primary path of communication with the host computer and configure another controller as secondary. Door objects are created last because configuring them correctly depends on having other child objects already configured, such as the controller, relays, inputs, and readers. Some examples of the parent-child hierarchy would be: ■ iSTAR Ouster > iSTAR Controller > Inputs, Outputs, Readers > Doors C•CURE 9000 Getting Started Guide Chapter 2 43 EFTA01225810 Using Panes ■ SC Port > ISC Controller > Inputs, Outputs, Readers > Doors Figure 23 on Page 44 shows the drop-down menu for the Hardware pane. Figure 23: Hardware Options in C•CURE 9000 NOTE Hato/rat L ii apC Add-On Board apC Corm Port apC Controler apC Door apC 132 Inas Board apC 18 Input Boyd apC Input apC R48 Output Board apC R8 Output Board apC Reader C•CuRE (noble DiokalCertificate Elevator Floor ISC Board ISC Comm Pert ISC Controller ISC Door ISC Input ISC Controllers are not supported as of C•CURE 9000 version 2.30. Configuration data and information about SC controllers is still included in C•CURE 9000 version 2.40 to provide a historical record of configured controllers and devices to aid customer who are transitioning to other controllers. Table 10 on Page 44 lists the objects you can access on the Hardware pane. Table 10: Hardware Pane Options Object Description ape Add￾On Board Displays a dynamic view of apC Add-on boardsconfigured in the system. The Add-on board provides a means to expand the capabilitiesof the apC panel by providing additional reader ports, supervised inputs. and additional outputs. apC Comm Port Displaysa dynamic view of apC Communication ports wag ured in the system. Comm Ports are used to manage Ethernet connectivity. apC Controller Displays a dynamic view of apC control panels configured in the system. Different typeset Add-on boards can be used for additional inputs and outputs. apC Door Displaysa dynamic view of apC doors configured in the system. In C•CURE 9000, doors provide access control by specifying readers, inputs. and outputs attAmated with an entrance. apC 132 Input Board Displays a dynamic view of the apC 132 Input boards configured in the system. The 132 Input board allows you to configure up to 32 Supervised inputs. 44 Chapter 2 C•CURE 9000 Getting Started Guide EFTA01225811 Using Panes Table 10: Hardware Pane Options (continued) Object Description apC 18 Input Board Displays a dynamic view of the apC 18 Input boardsconfigured in the system. Thel8 Input board allows you to configure up to 64 Supervised inputs (8 Inputs available on eight 18 Input boards). apC Input Displays a dynamic view of inputs configured in the system. An input is a software definition that associates a hardware switch, such as an alarm device, with an input on the controller or on an input board. There are two kinds of inputs: supervised and unsupervised. All switches can be in one of two states: active or inactive. An input reports the state of the switch. apC R48 Output Board Displays a dynamic view of R48 Output boardsconfigured in the system. You can add and configure up to two R48 Output boards per apC Add-on board. apC R8 Output Board Displays a dynamic view of R8 Output boards configured in the system. You can add and configure up to eight R8 Output boards per apC Add-onboard. Each of the eight R8 Output boards allows you to configure up to 8 Outputs. apC Reader Displays a dynamic view of apC readers config ured in the system. A reader is a hardware device that accepts access requests. The Reader editor lets you configure and edit Reader objects to control entrances and exits with in your facility. C•CURE Mobile C•CURE Mobile is a handheld device designed to allow operators to confirm the identityof card holders. This function can be performed when connected to the C•CURE 9000 host or in the field where there is no access to the C•CURE 9000 system. In Ott Line Mode, the database, which consists of personnel records and associated credential records, is stored on the C•CURE Mobile device. When connected to the host, the unit can run in Live Mode and use the entire personnel database. After connection to the host is established, all activity can be downloaded to the host and entered in the historical journals. The unit can establish communications to the host using an Ethernet connection or a Wi-Fi 802.119 wireless connection. The wireless range will vary depending on the technology, environment, and types of antennas used in the deployed wireless network. Digital Certificate Displays a list of encryption certificates currently generated on the system. Encrypted communication between an STAR eX controller and the C•CURE 9000 host requires three types of certificates: the CA certificate, the host certificate, and the controller certificate. Elevator Displays a dynamic view of elevators configured in the system. Access to floors is managed by controlling elevators. You configure an elevator or elevator group through buttons that represent floors with inputs and outputs. You can then add elevators to clearances that are used to control which cardholders can access the elevators and floors and at what times. Floor Displays a dynamic view of floorsconfigured in the system. Floor objects are used in Elevator security to determine what building floors are accessible for people with credentials for an elevator. You configure floors to enable you to define elevator control. Floors are paired with inputs and outputs to control access to floors through elevators. Before configuring elevators, you must configure floors and/or floor groups. Hardware Folder Use this function to create a new folder for hardware, name it, and organize hardware according to your site's needs. When you create the new folder on the Hardware Screen. it displays in the Hardware tree after you Save and Close. ISC Board Displays a dynamic view of ISC (Secure) boards configured in the system. The ISC Board Editor in C•CURE 9000 lets you create ISC Board objects so that you can select ISC Reader, Input and Output Boards that can be configured in the shelf in a new ISC Board. ISC Comm Port Displays a dynamic view of ISC Communication ports configured in the system. Comm Ports are used to manage ISC Ethernet connectivity. C•CURE 9000 Getting Started Guide Chapter 2 45 EFTA01225812 Using Panes Table 10: Hardware Pane Options (continued) Object Description ISC Controller Displays a dynamic view of ISC controllers configured in the system. The ISC (Secure) Controllers and Boards are access control field panels that coordinatecommunication between the C•CURE 9000 Server and the system security hardware, such as card readers. The ISC Controller editor lets you create ISC Controller objects. ISC Door Displays a dynamic view of ISC doors config ured in the system. In C•CURE 9000. doors provide access control by specifying readers. inputs. and outputs associated with an entrance. ISC Input Displays a dynamic view of in puts configured in the system. An input is a softwaredefinition that aerates a hardware switch, such as an alarm device, with an input on the controller or on an input board. There are two kinds of inputs: supervised and unsupervised. All switches can be in one of two states: active or inactive. An input reports the state of the switch. ISC Reader Displays a dynamic view of ISC readersconfigured in the system. A reader is a hardware device that accepts access requests. The Reader editor lets you configure and edit Reader objects to control entrances and exits with in your facility. STAR ACM Board Displays a dynamic view of ACM boards configured in the system. The ACM Board dialog box allows you to configure inputs, outputs and readers for the ACM Board. The ACM Extension (ACM Ext) tab, found on the ACM Board dialog box, allows you to configure the 118 inputs and R/8 outputson the ACM Board. STAR Cluster Displays a dynamic view of STAR Clusters config ured in the system. The STAR Cluster allows you to establish a primary and secondary communication path to the C•CURE System host for the iSTARs within the duster. STAR °patrollersmay be created onty within a cluster. iSTAR Comm Board Displays a dynamic view of STAR communications boards configured in the system. The STAR Comm Board is configured from the cluster and allows you to assign primary and secondary communications paths between the selected STAR cluster and the host. STAR Controller Displays a dynamic view of STAR controllers config ured in the system.T he STAR Controller Editor in C•CURE 9000 lets you create STAR Controller security objects for access management. STAR Door Displays a dynamicview of STAR doorsconfigured in the system. In C•CURE 9000, doors provide access control by specifying readers, inputs, and outputs associated with an entrance. STAR Input Displays a dynamicview of inputsconfigured in the system. An input is a software definition that associates a hardware switch, such as an alarm device, with an input on the controller or on an input board. There are two kindsof inputs: supervised and unsupervised. All switches can be in one of two states: active or inactive. An input reports the state of the switch. STAR Input Board The input board is a reader bus module that provides 8 additional supervised inputs. iSTAR Output Board The output board provides 8 additional Form C dry contact relay outputs. iSTAR Reader Displays a dynamic view of STAR readersconfigured in the system. A reader is a hardware device that accepts access requests. The Reader editor lets you configure and edit Reader objects to control entrances and exits with in your facility. 46 Chapter 2 C•CURE 9000 Getting Started Guide EFTA01225813 Using Panes Table 10: Hardware Pane Options (continued) Object Description Output Displays a dynamic view of outputs configured in the system. For the STAR controllers, a relay output Is a software definition that associates an event or input to a relay on the controller or add￾on module. For the Secure controllers, an output isa software definition that associates an alarm device with an output on the panel board or add-on module. The Output editor In C•CURE 9000 lets you configure and edit output objects. Reader LCD Message Sets Displaysa dynamicview of Reader LCD Message Setsconfigured in the system. A Message Set isa collection of LCD messages, such as"Present Card" orAcces Granted", that display on RM Readers to indicate different states to cardholders. You can customize the message sets to meet your needs and assign them to specific iSTAR/apC Controllers. Star Coupler Displays a dynamic view of Star Couplers configured in the system. The Star Coupler allows you to add readers, ports, inputsand outputs to the apC Add-on board. Star Coupler Ministar Displays a dynamic view of Mini Star Couplers configured in the system. The Mini Star Coupler single-expansion board allows the RM readers to be wired in a star topology. You can configure up to8 Mini Star Coupler Readers, each of which allows 2 Supervised Inputsand 2 Outputs. Star Coupler WPSC Displaysa dynamicview of Wiegand Proximity Star Couplers configured in the system. The WPSC isa Iwo-board set (a Lower and an Upper board) for the apC or apC/8X to allow direct connection of up to 8 read heads using Wiegand signaling. The Lower board alowsconnection of 4 Readers and 4 Supervised Inputs. The Upper board alowsconnection of 4 Readers and 4 Supervised Inputs. This Add-on board cannot be used with the Standard Star Coupler. Personnel Pane To configure various aspects of the personnel records of individuals monitored in C•CURE 9000, use functions available on the Personnel pane. Personnel records describe and define the access permissions granted to each individual, and specify certain badging options and related information. Access these functions from the drop-down menu in the Navigation toolbar. Figure 24 on Page 47 shows the drop-down menu for the Personnel pane. Figure 24: PersonnelOptionsInC•CURE9000 Personnel Personnel Quick Poisonnel Fist Name Last Nemi Badge Layout CHUID Format Clearance Credential Custom Clearance Guard Tour Guard Tout ScheduIng 1,1).x:es Pet sonnrl Pet sonnel Type Personnel Views Visit Table 11 on Page 48 lists the functions you can access on the Personnel pane. C•CURE 9000 Getting Started Guide Chapter 2 47 EFTA01225814 Using Panes Table 11: Personnel Pane Options Object Description Badge Layout A Badge Layout is an object that specifies a badge design created using the C•CURE ID Badge Designer and allows the design to be assigned to a badge credential in a personnel record. The badge layout also allows you to assign up to three card formats for Magnetic Stripe Encoding if your access credentials use mag encoding. CHUID Format C•CURE 9000 provides seven Card Holder Unique Identifier (CHUID) formats. You can modify some of the existing formats is meet your needs. Each format supports a different card type and usage. Depending on the accesscredentialrequirements for your site, you can use one or more CHUID formats. You can modify a format. but you must validate the modified format's fields to ensure that the resulting credentials are unique within your C•CURE 9000 installation. Clearance A clearance defines the locations and times an access card is vabd. In C•CURE 9000, you create clearance objects to define the access to specific doors and elevators, according to specific schedules, and assign these clearances to individualcardholders, or groups of cardholders. Use the Clearance editor to create a clearance object that defines the security objects accessible to a person assigned the clearance. Credential Credential allows you to create and activate Temporary Credentials, and to display a dynamic view listing the credentials for all personnel records in the system. Credentials describe access cards and PINS associated with personnel records. In the dynamic view, you can select individual records for more information. Custom Clearance Custom Clearances within a Personnel record give unique access, individualized by person, to Doors/Door Groups and Elevators/Elevator Groups. The Custom Clearance View allows you to view a list of all Custom Clearances in the system, and sort, filter and group the list. Guard Tour Guard Tour lets you configure a series of Stops where a Guard checks in during security rounds. You configure the Guard Tour stops that a guard must check in at to complete the tour. Stops can consist of any combination of Doors, Elevators, and Inputs. Guard Tour Scheduling Guard Tour Scheduling is used to schedule Tours and notify Guardswhen their selected Tours should run Images Images allows you to display a dynamic view listing all images stored in the system. The list presents three types of images, including: System, Dynamic Badge Image, and Portrait. The Images editor lets you import. name. and save images that you want to use as dynamic images on badge layouts. Personnel A Personnel record stores information about people allowed to access your site, including their accesscredentials and clearances. Use the Personnel editor to create and maintain personnel records. Personnel Type A Personnel Type lets you categorize personnel records according to the person's role in your organization. By dela ult you can select Employee. Contractor. or None. You can define additional personnel types, as necessary. Personnel Views Personnel Views allows easier and concise Personnel data entry. Rather than one screen for all, views allow each operator to have a unique view for their specific needs and function. Visit Visitor Management is a licensed option that helps you manage Visitors. Hosts. and credentials for visits. This feature provides a digital replacement for paper-based visitor log books and can organize and track visits to your facility more efficiently. C•CURE 9000 Visitor Management incbdessingle-/multi-visitor group scheduled appointments. temporary credential issuance, individual visitor check-in/check-out, and host e-mail notification of visitor arrivals. 48 Chapter 2 C•CURE 9000 Getting Started Guide EFTA01225815 Using Panes Configuration Pane To configure various system objects, use functions available on the Configuration pane. ACCESS these functions from the drop-down menu in the Navigation toolbar. Figure 25 on Page 49 shows the menu for the Configuration pane. Figure 25: Configuration F unctions in C•CURE 9000 ■ Configuration Audit Trigger Data Export Data Import Document Grow Hotday Journal Trigger Operator Partition Predefined tog Message Privilege Recurring Schedule Schedule Schedule by Tine Zones Sound Time Zone User•defned Fields Table 12 on Page 49 lists the configuration functions you can access on the Configuration pane. Table 12: Configuration Options Function Description Audit Trigger The Audit Triggers editor lets you define Triggers that can activate an Event when a specified Audit Log entryoccurs. Data Export Lets you export records from C•CURE 9000 databases to an export fie that can be used to import the records into external databases. You can export records at any time, schedule exports to run at predetermined intervals, or export records in response to events monitored by the system.You create a new export definition using an editor accessed from the Configuration pane. C•CURE 9000 maintainsa history of al exports. The system displays this history in a dynamic view that you access in the Administration Station on the Options & Tools pane. Data Import Lets you update the C•CURE 9000 database by importing recordscontained in external databases. Depending on your access privileges, you can import reoordsat any time, schedule imports to run at predetermined intervals, or import records in response to events monitored by the system. Use the C•CURE 9000 import editor to create an import definition that describes how to retrieve the new records you want to add, or that you want to use to update existing records. Save the import definition as a named object in C•C URE 9000. Document Lets you add URLs and different types of ties to C•CURE 9000 as Documents that you can assign to Personnel and Events. Event A C•CURE 9000 event is used todefine the way C•CURE 9000 responds to state changes that occur to objects in the system. Events let you Ink security objectsand actions in a single software component. Eventscan also control routine activities, such as unlocking entry doors, and turning on lights. Some events initiate actions that are widely used. Other events initiate specific actions and are used to meet specialized security requirements. C•CURE 9000 Getting Started Guide Chapter 2 49 EFTA01225816 Us Pines Table 12: Configuration Options (continued) Function Description Group Groups let you refer to several security objects using one name. You can configure security objects that actoate groups, such as inputs activating output groups, or events that specify actions for groups. Generally, anywhere in the system you can specify the name of a security object, you can also specifya group name. Holiday A Holiday is a day, or set of days, that you configure to schedule access control variations to time-based events, and to the usual lock and unlock times. Journal Trigger The Journal Triggers editor lets you define Triggers that can activate an Event when a specified Journal Message occurs. Operator An Operator is a person with the right to access and act on security objects such as readers. doors. inputs, outputs, and schedules. Each C•CURE 9000 Operator object is associated with an MS-Windows login. An Operator gains entry to the system after successfulauthentication on the domain a workgroup to which they belong. When a particular Operator accesses a dient application. C•CURE 9000 determines their Operator Privileges in the context of their MS-Windows User/Principal identity. The Operator editor lets you create Operators who can access the Administration Station and/or the Monitoring Station to perform required system functions, according to their assigned Privileges. T he Partition function (Partitioning), in conjunction with the Privileges and Operator functions, allows you to create different sub￾divisions, Partitions, for your C•CURE 9000 system and to separate security objects into these different partitions for both creation and viewing. Operators can be allowed access to or limited from accessing individual security objects associated with a Partition. Partitioning allows C•CURE 9000 to support customer models such as multi-tenant facilitiesand multi-bulding campuses. An C•CURE 9000 security objects can be partitioned, except for Time Zones, Logical Elevator Floors (the Inputs/Outputscontrolling the elevator buttons can be partitioned: hence, access to physical elevator floors can be managed through Partitions), Digital Certificates, System Variables, Badwp and Restore, Log Format Objects, CCTV Protocols, Event Viewer, and other objects dragged on top of the Application Layout. An operator's privilege tea partition may be "Full Access,' "Read Only," or "No Access." In a partitioned system, there is a System Administrator, who has the "System AP privilege—al privileges in al partitions, and a Partition Administrator, who has al privileges in that partition and a privilege giving access to common system objects, such as dynamic view and queries, necessary for getting started. The installed C•CURE 9000 system is non-partitioned and set up with a Default partition that contains basic system objects. The system is considered partitioned once any additional partitions are created. Predefined Log Message Predefined Log Message alows you to aeate log messages and assign them to events. You can group multiple log messages and then assign them to a specific events. Privilege A privilege is a collection of rights that control the use of access control objects such as readers, doors, inputs, outputs, and schedules. These individual rights are caged Permissions. Each access control object has a number of Permissions associated with it, such as No Access, Read, Edit, View, Delete, and New. A privilege must be associated with a schedule. Recurring Schedule Lets you create a Recurring Schedule object, which is a Schedule type for configuring sctedules that recur hourly, defy, weekly, monthly, and yearly. These Schedules are used primary for Guard Tours, but they also can be used for host Events Schedule Schedule objects are used todefine time sdiedules that can be used throughout the system to control access to doors, schedule reports and system tasks, and trigger events. Each schedule is oomposed of one or more Day Time Intervals. Schedule by Time Zone Lets you display a DynamicView that lists the Schedules (and Holidays) in the C•CURE 9000 database, and whether that Schedule/Holiday Is active in each Time Zone in which it is used. 50 Chapter 2 C•CURE 9000 Getting Started Guide EFTA01225817 Using Panes Table 12: Configuration Options (continued) Function Description Sound The Sound editor allows you to create Sound objects that reside in the C•CURE 9000 database. You can then use the Event editor to configure Sound actions using these Sound objects. Time Zone C•CURE 9000 lets you manage sites that span time zones by specifying different time zones for C•CURE 9000 dients, servers, and controllers. The C•CURE 9000 server and connected dientsare associated with a time zone that is configured on each computer. In C•CURE 9000, time zones are predefined and display in the local time of the client time zone. User Defined Fields User Defined Fieldsenablesyou to define additional fields that are induded in every record of a specific object type Wi your C•CURE 9000 system. Supported object types are Personnel, Credential, apC Controller, STAR Controller, Input (iSTAR and ape), Output (STAR and ape), Reader (iSTAR and ape), Door (STAR and apC), Elevator (STAR and ape), Video Camera, Video Server, Axis IP Camera, CCTV Camera. Video Pane The Video Folder Editor in C•CURE 9000 lets you create Video Folder objects. You can create Video Folders to store CCTV Switches, IP Cameras, Video Tours and Video Views. In addition, you can store Intellex Video Servers. Other video servers can be stored in the Video Folder if implemented through the C•CURE 9000 SDK. The drag and drop interaction enables you to drag a video server, or a video camera, directly into the interface and see the entire set of cameras displayed live. Access specific video functions from the drop-down menu in the navigation toolbar. Figure 26 on Page 51 shows the drop-down menu for the Video pane. Figure 26: VideoOptionsinC•CURE9000 Video L Axis IP Camera 1J - loos IP Canera CCTV Camera Video CCTV Protocol ,3 'CCTV Hutch exec VisgnCHDVR Video Camera I I Intellex Video Camera Intellex Video Server D I Tvict Camera TVR Video Server Video Folder video Tour Video View VIdeoEdge 4.0 Camara VgleoEdse 4.0 Sewer ach Table 13 on Page 52 lists the functions you can access on the Video pane. C•CURE 9000 Getting Started Guide Chapter 2 51 EFTA01225818 Using Panes Table 13: Video Pane Options Function Description Axis IP Camera The IP Camera editor lets you create IP camera objects so that you can use an IP camera to stream video in C•CURE 9000. CCTV Camera The CCTV Camera editor enables you to manipulate and create cameras that are attached to CCTV switches. C•CURE 9000 oontrolsonty the CCTVSwitch/Camera functionality; there is no direct CCTV video display within the C•CURE application. CCTV Protocol The CCTV Protocol editor lets you create CCTV protocol objects. Protocols define the set of commands that a switch can receive. You may select one of the system-supplied protocols or you can define a new one. If you have to modify a protocol or create a new one. contact the manufacturer directly. Software House technical support does not maintain an updated library of all CCTV manufacturers protocols. CCTV Switch CCTV Switch allows you to create a CCTV Switch object. exacqVision/HDVR Video Camera You can create video camera objects for exacqVision/HDVR video. exacqVision/HDVR Video Server You can create video server objects for exacqVision/HDVR video. Intellex Video Camera The Video Camera editor lets you create video camera objects. You can then associate the Video Camera object with camera alarm and camera action objects. Intellex Video Server The Video Server editor lets you create video server objects. You can then associate a video server object with camera. server alarm. and server action objects. TVR Camera You can create video camera objects for TVR video. TVR Video Server You can create video server objects for TVR video. Video Folder The Video Folder Editor lets you create Video Folder objects to store CCTV Switches. IP Cameras. Video Tours and Video Views. In addition, you can store Intellex Video Servers. Other video servers can be stored in the Video Folder if implemented through the CCURE 9000 SDK. Video Tour The Video Tour Editor lets you create Video Tour objects from multiple vendors. A Video Tour is a list of views in sequence for a user defined dwell time in a Live Video Window. It enables you to view live video from a configured collection of views. Beginning with the first camera, video is displayed for a fixed amount of time before automatically advancing to the next camera. This processoontinues until the last camera in the tour is reached. or indefinitety if lopping is enabled Video View The Video View Editor lets you create Video View objects without first creating a Video Tour. A Video View is a view from a camera or a group of cameras. VideoEdge 4.0 Camera You can create video camera objects for VideoEdge video. VideoEdge 4.0 Server You can create video server objects for VideoEdge video. General Purpose Interface The General Purpose Interface provides a general way for C•CURE 9000 to talk to a third-party device. The General Purpose Interface does the following: 52 Chapter 2 C•CURE 9000 Getting Started Guide EFTA01225819 Using Panes ■ Initializes communication between a C•CURE 9000 system and a third-party device. ■ Maintains a communication channel by polling a third-party device. ■ Defines General Purpose Actions that send messages to third-party devices using C•CURE 9000 event activation and then support acknowledgement messages from these third-party devices. ■ Defines General Purpose Monitoring Points that represent monitoring points in third-party devices. • Supports five Activated Status properties for these General Purpose Monitoring Points. ■ Defines General Purpose incoming message protocols that interpret incoming messages from third-party devices and support acknowledgement for incoming messages. Figure 27: General Purpose Interface Options New - !General Purpose Action Gen Genial General Purpose Device General Purpose Folder General Purpose Message Protocol General Put Monitor • Poit a - Search The General Purpose Interface can work with any device that uses ASCII code for communications protocol for event monitoring. Table 14 on Page 53Iists the functions you can access on the General Purpose Interface pane. Table 14: General Purpose Interface Pane Options Function Description General Purpose Action Lets you create a General Purpose Action toalow the sending of a message to C•CURE 9000 when an event occurs. General Purpose Device Letsyou create a General Purpose Interface device and configure the connection parameters. Enable the device and configure the connection type. General Purpose Folder Letsyou create a folder to contain General Purpose Interface objects. General Purpose Message Protocol Lets you areateimoddy Message Protocols that interpret incoming messages from third party devicesand support acknowledgment for these messages—activating and deactivating General Purpose Device Monitoring Points. General Purpose Monitoring Point Lets you create and modify Monitoring Points that can activate events for a particular General Purpose Device. C•CURE 9000 Getting Started Guide Chapter 2 53 EFTA01225820 Bass; Object T asks NOTE Basic Object Tasks Many of the actions you use to configure C•CURE 9000 objects are consistent for most object types. You can perform the following tasks on C•CURE 9000 objects in each of the panes. ■ Creating an Object on Page 54 ■ Creating an Object Template on Page 54 ■ Creating an Object from a Template on Page 55 ■ Editing an Object on Page 56 ■ Using the Actions Button on Page 56 ■ Viewing a List of an Object Type on Page 57 ■ Using the Object List Context Menu on Page 58 ■ Deleting an Object on Page 60 ■ Sorting and Filtering the List of Objects on Page 60 ■ Exporting an Object on Page 61 Creating an Object You can create an object from the Personnel pane using the Personnel pane drop-down list and the new button for the object type. To Create an Object from the Personnel Pane 1. In the Navigation Pane of the Administration Workstation, click Personnel to open the Personnel pane. 2. Select the object type you want to create (for example, Personnel) from the drop-down list in the Personnel Pane. 3. Click New to create a new object of the type you selected. The object type's editor opens, and you can configure the object. 4. To save your new object, click Save and Close. - Or - Alternatively, if you want to save the object and then create a new one, click Save and New. The current object is saved and closed, but the object editor remains open to allow you to create a new object. On the Personnel Editor, you can click Save if you want to save the Personnel record and continue editing it without closing the editor. Creating an Object Template You can create a object template for most object types. You can use the template as the basis of new object records by saving the settings you want your objects to have in common. In a template, you can fill in field values with the same values for all records, and then use the template when you are creating new records. (This is subject to the settings that C•CURE 9000 allows you to save in a template for that object type.) 54 Chapter 2 C•CURE 9000 Getting Started Guide EFTA01225821 BaskObjectTasics Example: You could create a template for all personnel with a Personnel Type of Employee, with the same set of Clearances. Whenever you are creating a new Employee Personnel record, you can save time by creating the new record from the template instead of the default blank form. To Create a Object Template 1. In the Navigation Pane of the Administration Workstation, click Personnel to open the Personnel pane. 2. Select the object type you want to create (for example, Personnel) from the drop-down list in the Personnel Pane. 3. Click the down-arrow on the New button and click on Template to create a new object template. The Object's editor opens, and you can configure the object. 4. Any fields that you configure values for become part of the template (subject to the settings that C•CURE 9000 allows you to save in a template for that object type). When you subsequently create a new object of this type from that template, these field values are already filled in. 5. To save your new object template, click Save and Close. NOTE On the Personnel Editor, you can click Save if you want to save the Personnel template and continue editing it without closing the editor. Creating an Object from a Template You can create a new object from a Template that you have previously saved. The new object created from the template contains the same settings, fields, and tabs as the template. To Create an Object from a Template 1. In the Navigation Pane of the Administration Workstation, click Personnel to open the Personnel pane. 2. Select the object type you want to create (for example, Personnel Views) from the drop-down list in the Personnel Pane. 3. Click the down-arrow on New and select a template from the templates listed under —Templates. Persomel Views Template ---Tearhstes operatorpelsonnel-view-template 4. The object's Editor opens, and you can configure the object. 5. Type a name for the object in the Name field (the Name must be unique). 6. To save your new object, click Save and Close. C•CURE 9000 Getting Started Guide Chapter 2 55 EFTA01225822 Base Occ t Iris Editing an Object Must objects in the Personnel pane have an editor that is used to configure the objects of that type. Credential is the exception - Credentials (which are contained in a Personnel record) are created using the Personnel editor. To Edit an Object 1. Display a Dynamic View list of the object you wish to edit (see Viewing a List of an Object Type on Page 57). 2. Click the object you wish to modify to select it. 3. Right-click the selected object and choose Edit from the context menu. 4. The object's Editor opens and you can change any of the settings for the object. 5. To save your modified object, click Save and Close. NOTE On the Personnel Editor, you can click Save if you want to save the Personnel record and continue editing it without closing the editor. Using the Actions Button Certain fields that let you select from a list of objects by clicking a Select button E also have an Actions button B that allows you to create a new object or edit an existing one. The Actions button menu includes New only for the following Object types: ■ Application Layout ■ Badge Layout ■ Event ■ Personnel Type ■ Query ■ Report Form Consequently for most Object types, the Actions button menu only includes Edit, and it is only available for user￾configured Objects. You cannot edit System supplied pre-defined objects. Example: ■ The Personnel field Personnel Type has a Selection button El and an Actions button 0: Personnel Type: 'None [Default] • If you click the Actions button, a menu appears that allows you to create a New Personnel Type object. Personnel Type: 4A New II 56 Chapter 2 C•CURE 9000 Getting Started Guide EFTA01225823 Basic Object Tasks • When you click New, the editor for the selected object type opens as a new blank object, and you can edit the new object. • If you select an object for the Personnel Type field, and then click the Actions Button, a menu appears that additionally offers Edit, allowing you to edit the object you have selected. Personnel Type: Operator Name: None [Default] • II New Edit • When you click Edit, the editor for the selected object opens and you can edit the object. • The Guard Tour Guards Additional Notifications field has a Selection button 2 and an Actions button Lithat is not available: Additional Notifications • When you select a user-defined object for the Additional Notifications field, the Actions Button becomes available. If you then click the button, a menu appears that additionally offers Edit, allowing you to edit the object you have selected. Additional Notifications frersonnelEmailGroupl • When you click Edit, the editor for the selected object opens and you can edit the object. Viewing a List of an Object Type You can view a list of all objects of a specific type by opening the default Dynamic View for the object type. To View a List of an Object Type 1. In the Navigation Pane of the Administration Workstation, click Personnel to open the Personnel pane. 2. Select the object type you wish to view in a list (for example, select Personnel from the Personnel pane drop￾down list). 3. Click aig to open a Dynamic View listing all the objects of this type. (You can also click the down-arrow of this button to either view the list in the current tabbed view or open a new tabbed view). 4. You can sort, filter, and group items in the list using the Dynamic View icons. See Sorting and Filtering the List of Objects on Page 60. 5. You can right-click an object in the list to open the context menu (see Deleting an Object on Page 60) and perform any of the functions on that menu. 6. You can right-click on a column heading (such as Name) in the view to display a context menu that lets you change the columns displayed by the Dynamic View. C•CURE 9000 Getting Started Guide Chapter 2 57 EFTA01225824 Basic Object Tasks H z Department Name Disabled Intl Name Object ID Personnel Type Mote columns • Click on the name of a column to add it to the view. • Click on a column that is currently displayed in the view (marked with Mk to remove that column from the view. • Click on More Columns to choose additional columns to display, if there are additional columns that are not displayed. Select one or more columns from the dialog box that appears, using CTRL+Left-click, or a range of columns using SHIFT+Left-click, then click OK to display the additional columns. Drat column, to Group bY here Ropey ' I D.ritc. ...1 Ckk Fee bawds. la. ,— — 2:i AkemmeShist PON Select 'As tox k hs Immo is Xl0X4V Wil Amerkatt Anoestbork Ewe& Vikherweetpoemback Yoke,n echoes en event Anionbacktotoc. WI** he mem* awn km teM0staback winch Mn Lai read ea. occkped by ht uto Wed PLC.:4 Imo Tat dies veld why io alarm amerce Re. The cunat own' as lerddhs Mita% Dahl Oakes Feld DSO NW CUSI0MIN NU Dila Dre3 Custnet Field Da.3 Oztel Calmer Field Dal .......n.de.... ca.. ••• .....".• l •••••••• . • va•-• r•••••6•4 W.... Columns that you add or remove from a Dynamic View in this manner are only in effect until you close the Dynamic View. If you want additional columns to appear each time you open the view, you must edit and save changes to that specific dynamic view. NOTE If you add new records to the database while you have a Dynamic View open, or delete existing records, the Dynamic view automatically updates to add or remove these records. You can also click to refresh the list manually. Using the Object List Context Menu The context menu that opens when you right-click on one or more objects in the Dynamic View includes some standard selections and often contains additional selections that are specific to the object type. (See Figure 28 on Page 59 for an example, showing the Personnel context menu). You can select one or more object in the Dynamic View (using multiple selection combinations such as SHIFT+Left￾click and CTRL+Left-click) and perform functions such as Set property, Add to group, Export selection, and Find in Journal using the context menu. See Table 15 on Page 59 for definitions of the standard context menu selections. 58 Chapter 2 C•CURE 9000 Getting Started Guide EFTA01225825 Basic Object Tasks Figure 28: Personnel List Context Menu V&K X rJV Edit Delete Set property Add to group Export Export selected Portraits... Find in Audit Log... Find in Journal... [4( Change Partition Grace Personnel gi Assign Clearances %It Remove Clearances Remove Person From Area Antipassback Reset Card Area Lockout Grace Grace Carpool Group Activate Temporary Assign Temporary Credential Return Temporary Show Associations Monitor Table 15: Object List Context Menu Selection Description Edit Click this menu selection to edit the object. The object's editor opens. You can rename the record, change its Description. and the objects and fields to include in it. Delete Click this menu selection to delete the selected object. A prompt appears asking you to confirm that you want to delete the object. Click Yes to delete the object or No to cancel the deletion. Set Property Click this menu selection to change the Property value of a field in all the selected objects. For example. you could select multiple Personnel and change their Personnel Type to "Employee'. A dialog box appears asking you to select a property to change. Click 0 to open a selection list and click the property you wish to change. You can then change the value of this property by changing the Value field. Add to Group You can add one or more selected objects to a Group of that object type. When you click this menu choice, a dialog box appears for you to select the Group to which to add the object. When you dick a Group of the Object type in the list, the selected object is added to the Group. If you click Add to Group and no Group of that type exists, the system will create a Group and allow you to add the items you selected to that Group. The Group editor opens and displays the new group with a system-generated name, such as (AUTO GENERATED GROUP timestamp). You can rename the group and dick Save and Close to save it. Export Selection Click this menu selection to open an Export...to XML or CSV file dialog box to export one or more of the selected objects to either an XML or a CSV file. This allows you to quiddy and easily create XMLJCSV reports on the selected data. See Exporting an Object on Page 61 for more information. C•CURE 9000 Getting Started Guide Chapter 2 59 EFTA01225826 Basic Object Tasks Table 15: aged List Context Menu (continued) Selection Description Find in Audit Log Click this menu selection to open a Query Parametersdialog box in which you can enter prompts and/or modify the query aiteria to search for entries in the Audit Log that reference the selected object. When found, the results display in a separate Dynamic View (see the C•CURE 9000 Data Views Guide). Find in Journal Click this menu selection to open a Query Parameters dialog box in which you can enter prompts and/or modify the query aiteria to search for entries in the Journal that reference the selected object. When found the results display in a separate Dynamic View (see the C•CURE 9000 Data Views Guide). Change Partition This selection isavailable if your system is partitioned. Clid< to open a dialog box that allowsyou to change the Partition to which the object belongs. For more information see the chapter on Partitions in the C• CURE 9000 Software Configuration Guide. Show Association This selection isavailable for certain object types. Click to open a Show Association dialog box that lists al the security objects associated with the object selected in the Dynamic View. See Showing Associations for an Object on Page 62 for more information. Monitor This selection is avaiable for certa in object types. Clid< to open an Admin Monitor Activity Viewer to see real-time activity for the selected object(s) and, if you choose, certain diad objects. See Monitoring an Object from the Administration or Monitoring Station on Page 65 for more information. Deleting an Object You can delete an object from C•CURE 9000 if it is no longer needed. To Delete an Object 1. Display a Dynamic View list of the object (see Viewing a List of an Object Type on Page 57). 2. Select the object you wish to delete. 3. Right-click the selected object and choose Delete from the context menu. 4. Click Yes in the dialog box that appears to confirm that you want to delete the object. A dialog box appears to show the progress of the deletion. 5. Click OK to complete the deletion. Sorting and Filtering the List of Objects Once you have displayed the list of Objects Dynamic View, you can sort and filter this list using the Dynamic View toolbar. Filtering the List of Objects You can filter the list of Objects to display only the Objects that match the criteria you specify. You can filter the list by any field that is displayed on the Dynamic View. To Filter the List of Objects I. From the Objects Dynamic View, click in the Dynamic view. on the Dynamic View toolbar to enable filtering. A filter row appears 60 Chapter 2 C•CURE 9000 Getting Started Guide EFTA01225827 Basic Object Tasks 2. Click in any column in the filter row to filter the data in the list. You can type in a value, or choose a value from the drop-down list (click the a that appears when you click in the column). 3. Click the filter button to chose a filter criteria (such as "Begins with" or "Contains") from a drop-down list. The filter button changes to reflect the choice you made. 4. You can turn off all filtering criteria by clicking ID to the left of all columns, or you can click the same icon in a column you have selected to clear data in that column only. Sorting the List of Objects You can sort the list by any field that is displayed on the Dynamic View. To Sort the List of Objects 1. From the Objects Dynamic View, click a column heading (such as "Name") to sort the list of Objects by the data in that column. 2. You can toggle the sort from ascending to descending and back by continuing to click on the column head. 3. You can display additional columns by right-clicking a column heading and clicking on a column in the list of columns. Columns shown in the list with a check mark are already selected for display. Printing a List of Objects You can print the Objects Dynamic View as a report listing all or some of the Objectson your system. You can filter and sort the list before sending it print. To Print the List of Objects 1. From the Objects View, sort and filter the list so the records you want to print are displayed in the desired order. You can also change the width of the data columns by clicking the column margin and dragging to make it wider or narrower. 2. Click to open a Wmdows Print dialog box. You can set the paper size, source, orientation, and margins from this box. You can also click the Printer button to select a different printer. 3. Click OK and a Print Preview dialog box appears. You can use the toolbar to zoom the preview, change the arrangement of displayed pages, navigate to any page of the list, and send the list to print. 4. Click the Print button to send the Objects list to print. Exporting an Object From a Dynamic View of an object, you can export an object as an .XML file or a .CSV file. Although XML is the initial default file type, once you choose a type in the Save as type field, whether XML or CSV, that becomes the default the next time this dialog box opens. NOTE ■ When you export to an XML file, all available data for the selected object(s), whether displayed in the Dynamic View or not—as well as all the child objects of the selected record(s), is exported. C•CURE 9000 Getting Started Guide Chapter 2 81 EFTA01225828 Basic Object Tasks • When you export to a CSV file, you can view the exported data in an Excel spreadsheet and further manipulate it for your use. Only data in the columns displaying in the Dynamic View is exported, and in the order displayed. This allows you to both select and arrange data fields for your report. NOTE CSV-formatted exports cannot be imported into C•CURE 9000. If you require importing functionality (such as importing a object into a different C•CURE 9000 server, export to XML. When you click Export Selection, you are running the export on the client computer. Consequently, the system does not use the Default Export Directory Path—which is on the server. It opens a directory on the client, reverting to the last directory used. You can navigate to the default export server directory, if you wish. Or to avoid confusion or use the same destination folder for both client and server computers, you can use UNC (Universal Naming Convention) paths. Example: \ \ ComputerName \ Program Files \ Software House \ SWHSystem \ Export For more information, see the Dynamic Views chapter in the C• CURE 9000 Data Views Guide. To Export an Object to an XML or CSV File 1. Open a Dynamic View of the object type (see Viewing a List of an Object Type on Page 57). 2. Select one or more objects from the list, then right-click. 3. Select Export Selection from the context menu. A Windows file selection dialog opens to allow you to export the object(s). 4. Navigate to the folder where you want to save the exported objects. 5. Choose the type of export from the drop-down list in the Save as type field (either Export as XML file or Export as CSV file). 6. Type a file name in the File name field, or click on a file in the folder (that file will be overwritten by the export) and click Save to export the object. Showing Associations for an Object For certain C•CURE 9000 security objects, you can select the object in a Dynamic View or Status List and see the other objects related to it. See Table 16 on Page 62 for the list of objects that allow this option and the related objects that can be displayed for each one. See To Show Associations for an Object on Page 64 for the detailed procedure. Table 16: Objects with Show Association Option Objects with 'Show Association' Option Associated Objects that Display Application Layout Event, Operator Area (STAR) Event Badge Layout Credential 62 Chapter 2 C•CURE 9000 Getting Started Guide EFTA01225829 11 0 I ass Table 16: Objectswith Show Association Option (continued) Objects with 'Show Association' Option Associated Objects that Display Card Formal Reader CCTV Protocol CCTV Switch CHUID Format Card Format Clearance Personnel Document Application Layout. Event. Guard Tour. Personnel Door (iSTAR & apC) Area. Clearance. Guard Tour Stop. Intrusion Zone. Map. Personnel(Custom Clearance& Personnel Trigger) Door Group Clearance. Keypad Command. Personnel(Custom Clearance) Elevator (iSTAR & apC) Clearance. Guard Tour Stop. Map. Personnel (Custom Clearance & Personnel Trigger) Elevator Group Clearance. Personnel(Custom Clearance) Event Area, CCTV Switch, Cluster, Controller. Data Import. Door, Elevator, Guard Tour, Guard Tour Stop. Input. Intrusion Zone. Journal Trigger. Keypad Command. Map. Personnel (Personnel Trigger). Reader. Video Camera. Video Server Event Group Area. Door. Elevator. Guard Tour. Guard Tour Stop. Input. Intrusion Zone Guard Tour Guard Tour Scheduling. Workflow Holiday Group Recurring Schedule. Schedule. Schedule by Time Zones Input (iSTAR & apC) Door. Elevator. Event. Guard Tour. Intrusion Zone. Map. Reader Output (STAR & apC) Door. Elevator. Input. Map. Reader Output Group Elevator. Input Personnel Visits Personnel Group Area. DoorGuard Tour. Guard Tour Scheduling. Keypad Command Personnel Type Personnel Predefined Log Message Event. Guard Tour Query Data Export. DynamicView. Report Reader (STAR 8. apC): Door. Elevator. Map Report Guard Tour Report Form Report C•CURE 9000 Getting Started Guide Chapter 2 63 EFTA01225830 Bas:0o cot I as-Pcs Table 16: Obiectswrth Show Association Option (continued) Objects with 'Show Association' Option Associated Objects that Display Schedule Door. Event, Guard Tour Scheduling, Reader Sound Event Video Camera Application Layout, Video View, Video Server Video Camera (one assigned via Alarms- Video Camera Action) Video View I Application Layout, Video Tour To Show Associations for an Object 1. Display a Dynamic View/Status list of the object (see Viewing a List of an Object Type on Page 57). 2. Select the object that you wish to show associations for. 3. Right-click the selected object and choose Show Association from the context menu. A Show Association dialog box appears with a list of the object types associated with the selected object—along with the number of objects of that type, as shown in the example in Figure 29 on Page 64. Figure 29: Show Assodatbn Dialog Box r Assn, ',dm. rhqpr E3 Wolin Downie yam Rebell) I r • I can Group 4. Double-click any of the object type rows to open a dynamic view of all the objects of that type, as shown in the example in Figure 30 on Page 64. Figure 30: DynarnicView of Associated Objectsof Selected Type a News • Faun Z tinil V LOS Carr. 2 0 ag columns to group by here Name I Dewier I ParibonName g ClowanookloDca Dotal Clownotkoar2nfootBack DelaA 64 Chapter 2 C•CURE 9000 Getting Started Guide EFTA01225831 Basic Object Tasks You can perform any action on the object(s) displayed on this dynamic view that you can usually do for this type object , such as Edit, Delete, etc. For information, see Using the Object List Context Menu on Page 58. Monitoring an Object from the Administration or Monitoring Station You can select certain C•CURE 9000 security object(s) in an Administration Station Dynamic View or Monitoring Station Status List and open a Monitoring Activity Viewer for those specific object(s)—and some of their child objects. You can then view the activity of the object(s) in real time going forward until you close the Viewer. See Table 17 on Page 65 for the list of objects that allow this option, and the child objects that can be displayed for each one. See To Show the Monitor Activity Viewer for an Object on Page 66 for the detailed procedure. NOTE Trigger and Event Children The Trigger child object only displays on the Monitor when its target action is an Event. Both the Trigger and the Event display in the list with the Event underneath as the child of the Trigger. Group Objects For each Group, such as Door Groupl or Elevator Group2, only the individual object members of the Group display in the list. Table 17: Objeciswith Monitor from Administration or Monitoring Station Option Objects with 'Monitor' Option Child Objects that can be Monitored Area (STAR) Door, Trigger & Event Controller (STAR) Door. Elevator. Input, Output, Reader. Trigger & Event, Add-on Board: Input, Output, Reader. Trigger & Event NOTE: Which Add-on Boards display (as well as which of their child objects) depends on the Controller type and what is turned on. Door (STAR &apC) Input, Output. Reader. Trigger & Event Elevator (STAR &apC) floor, Reader. Trigger & Event Event Group (only individual membersdisplay) Area (STAR), Door. ElevatocEvent, Holiday. Input, Intrusion Zone, Output, Personnel. Reader Guard Tour Guard Tour Stop. Trigger & Event Input (STAR &ape) T rigger &Event I ntr usan Zone (STAR) Door, Input, Trigger & Event Output (iSTAR &apC) Personnel (only Door swipes display) Reader (STAR &apC) ',Tv Jt. Output. T r•gger & Event C•CURE 9000 Getting Started Guide Chapter 2 65 EFTA01225832 Basic Object Tasks Table 17: Obsctswith Monitor from Administration or klonrtoring Station Option (continued) Objects with 'Monitor' Option VideoCamera Child Objects that can be Monitored To Show the Monitor Activity Viewer for an Object 1. Display a Dynamic View of the object on the Administration Station or a Status List for the object on the Monitoring Station (see Using the Object List Context Menu on Page 58). 2. Select the object(s) whose activity you wish to monitor. 3. Right-click the selected object(s) and choose Monitor from the context menu. A Monitor Activity Viewer appears with the selected object(s) displayed in the Monitored Objects pane on the left and the Activity Viewer pane on the right, as shown in the example in Figure 31 on Page 66. Figure 31: Monitor Activity Viewer Mated alias Sio•Cliols EIGifiver rea2 Ti. Mfr≥ I Deep Tim Ackviy *um 0 4. Click the Show Children button in the left pane if you want to display activity for any related children, as shown in the example in Figure 32 on Page 66. Figure 32: Monitor ActivityViewer withChid Objects bleram1Objcas Gu dT s 2 mE.STAA Deal. 01 .STAfteX.1• "neve .STAROccel. MSre“KorG311945517)34966 91 &MAX.? ■ iSTAR S...benekIMICS00778511 31 iSTARtX.3 Tie i i iilifat3 Deo • Tao DOW* • Click the Hide Children button if you do not want their activity to display. 88 Chapter 2 CCURE 9000 Getting Started Guide EFTA01225833 BaskObjectTasks The activity for the object(s) displays in the Activity Viewer pane on the right as it occurs, as shown in the different example in Figure 31 on Page 66. Figure 33: Monitor Activity Viewer with Child Ohiects Displayed NOTE — o Moestaed 0bje<le I . Olken • NNW IC•fmeake) IIIMODEr I Ervin PP1 Door .1 PP1 Door-2 Tit; Dee • Imo anew 4 2 10 50 PM 8/20/2014 21102 FM El8/20/2314 2 11 12 FM 8/20/2011 2 11 13PM P3/20/2014 2 10.43 F141.4trretcl lee& Leel (0004,1: CP1 Dort IDeleuer IN1 QIInrcdl Know, enar seatval Lao M•al is 23/2314211.00 1,141AdmIted 1004. Lee4 (Detai) el Deal IDeleillaNlallexeece whew° ama Aka 11Canad Anal 18/20/2014 2 11 10 FM) 6 TAR DCOPP1 Deal (Pee•) it door local P3/20/2014 2 11 11 FM] ;STAR Oca PP1Doca [Odell° ox dated rnCa it.4 The activity for the child objects displays in the Activity Viewer pane when you click Show Children. However, if you later click Hide Children, while the previous activity remains on the pane, no further activity displays for the children. Object Selection Dialog Box When you are configuring an object that includes relationships to other objects, an object selection dialog box opens when you click on the select button (0). A typical object selection dialog box appears in Figure 34 on Page 67. Figure 34: Object Selection Dialog Box team raw, Sex. bps I61•14 Aside __J Nene Oleo Mb I Z T`:a 4. 001101 11 Seed, Dal colar/n to Group by here Men• • I Nava, CIO He a, Ma thin 1A: Weldrefl ReedeMOP 1 COMIGIAR PadelF6gie 1 SUS R•adal Edo. 1 GRA Readenclgie 1 z i A C•CURE 9000 Getting Started Guide Chapter 2 67 EFTA01225834 Basic Object Tasks You can use the Search button to find objects with names that start with letters/numbers you type into the Name starts with field. The dialog box includes a toolbar that lets you filter and group the objects you can select. Toolbar definitions are explained in Table 18 on Page 68. Table 18: Object Selection Toolbar Definitions Icon Description Definition Itulfc,,.; Click to update the list of objects/Groups. t l Group Click to toggle the data Grouping bar. This button does not change the grouping of the data itself. When the data grouping bar isdisplayed, you can drag a column onto the bar to cause the data to be grouped by that property. Example: You can dick and drag a Column in the list to group the objects by that category- the list will re-order itself to group the objects according to the column you chose. If you chose Part It lo n Name. all the objects would be grouped by Partition Name. Y •—• Filter Click to toggle the data filtering bar. This button does not change the filtering of the data itself. When the data filtering bar is displayed, you can click the bar to set filtering criteria. Example: If you are viewing a list of Doors, you can type a Din the filter bar, and only the Door names that begin with 'Ware displayed. ra Show Groups Toggle to show/hide Group objectsof the selection type. This loon only appears when selecting a Group is anoved. Example: If you are selecting STAR Doors, click this button to display STAR Door Groups. D Show Objects Toggle to show/hide objects. This is the default view showing individual objects of the selection type. Example: If you are selecting STAR Doors. click this button to display individual STAR Doors. a Select Object from Map Click to open a dialog box that allows you to select items of the selection type that appear on Maps. This loon only appears when selecting an object from a Map is allowed. See Selecting Objects from a Map on Page 69 Example: If you are selecting STAR Doors, click this button to display individual STAR Doors that appear on Maps. Filtering Selections When you click Filter y a filter bar appears under the column headings in the selection control dialog box. You can use the filter bar to enter values that will filter (narrow down) the entries (rows) in the dialog box. Example: If you are viewing a list of Events, you can type a B in the filter bar, and only the Event names that begin with "B" are displayed. See Figure 35 on Page 69. 68 Chapter 2 C•CURE 9000 Getting Started Guide EFTA01225835 Basle Obiect Tasks Figure 35: Filter Bar bil•Killi USN= Pyre . "—I' IIIIMANI ilk I "0 to Y IF lil la c. columns to Grout, b./ hem Mar ti . hp, Mel IleklylsaJcund bow 1 I Selecting Objects from a Map 1. Click 3 on the object selection dialog box to open a dialog box that allows you to select items of the selection type that appear on Maps. Figure 38: Map Selection Dialog The dialog box shows the list of maps that contain objects of the type you selected. 2. Select Q a map from the list to view a map, so that you can select an icon. The map you selected is displayed on the right side of the dialog box. C•CURE 9000 Getting Started Guide Chapter 2 89 EFTA01225836 Basic Object Tasks Figure 37: Icon Selection Dialog 3. Click an icon in the displayed map to select the object represented by the icon. The selected object is added to the field whose Q you clicked. 70 Chapter 2 C•CURE 9000 Getting Started Guide EFTA01225837 Monitoring Station Monitoring Station The C•CURE 9000 Monitoring Station application lets you track events, activities, access and device status, along with ongoing security access. The Monitoring Station also allows you to perform manual actions such as locking or unlocking doors, arming or disarming inputs and outputs, and, depending on your operator privileges, performing downloads to controllers. For more information, see the C•CURE 9000 Monitoring Station Guide. The appearance and content of the Monitoring Station user interface is defined by an application layout. Application layouts are configured in the C•CURE 9000 Administration Station and arrange multiple viewers on a single screen to simultaneously monitor multiple elements of your security system. Software House provides several types of viewers. Each viewer monitors a specific element of your system. Determining which viewers to incorporate into the application layout is based on your security priorities and determines what Monitoring Station operators can observe. The site administrator creates application layouts that contain the specific monitoring viewers and status information required to monitor your site. For more information about creating application layouts in the Administration Station, see Data Views Pane on Page 42. Accessing the Monitoring Station You access the Monitoring Station from a C•CURE 9000 client. To access the Monitoring Station on the client, the C•CURE 9000 server must be running, the C•CURE 9000 client must be connected to the server, and the C•CURE 9000 drivers must be running. The server must also have a valid C•CURE 9000 license. For details about validating and monitoring your license, see the Licensing chapter of the C•CURE 9000 Installation and Upgrade Guide or the C•CURE 9000 online help. When you log in to the Monitoring Station, you do so in the context of a specific C•CURE 9000 operator. C•CURE 9000 supports single sign-on and uses your Windows login to authenticate you in C•CURE 9000. Your ability to access the Monitoring Station depends on the access privileges assigned by the system administrator to your user identity. In C•CURE 9000, privileges can be set at the object level. The configuration of the operator identity you use to open the Monitoring Station specifies a particular application layout. When the Monitoring Station opens, it displays the default interface configured for the operator mapped to your Windows login. The C•CURE 9000 installer creates a desktop icon that you can use to open the Monitoring Station. You can also use the Windows Start menu. To Open the C•CURE 9000 Monitoring Station To open the Monitoring Station, do either of the following: ■ On the Windows desktop, double-click the Monitoring Station icon: ■ From the Windows Start menu, select All Programs (with the classic Start menu, Programs), Software House, C•CURE 9000, and then click Monitoring Station. Figure 38 on Page 72 shows the menu path. C•CURE 9000 Getting Slatted Guide Chapter 2 71 EFTA01225838 Monitoring Station Figure 38: Access to the C•CURE 9000 Monitoring Station from the Start Menu 1.21Peolliams SOftwle Mute Matitraticollicelstadco Li tern. Coefvsabcn 9 Licese. The Monitoring Stations opens. Figure 39 on Page 72 shows one of the default views included with C•CURE 9000. Figure 39: Monkoring Station gajaear . _KkOwn) B052 Qpvigo. wit Dele.11‘.Y. I Deit0 2, C CURE SOY Bober Bag 0 non Haidwar... HardwareSta.. vecke ' IP Sows Cain ISI Tours di CCTV9thictes WI CCN0nm C PContras fit i MIA* laile -Tow 'tin Lea Pant itetrialAppi... MIC° CO ISIthiei ll Tit; Ma DS- Toe POPP $SeowAmebae. Owe Tens ine Locace Pence Suds Qmels Waster Wee AEBRasetOwe MED GA I Tomei* Nantes a 201112015 PIA • To Close the C•CURE 9000 Monitoring Station 1. Do either of the following: • In the Monitoring Station, in the title bar, click the close icon: • In the Windows System tray on the right side of the desktop, right-click the Monitoring Station icon: • Click Exit from the pop-up menu. If you are the last Operator to exit the Monitoring Station, the system prompts you to confirm that you want to log off. 2. Click Yes to exit. . 72 Chapter 2 C•CURE 9000 Getting Started Guide EFTA01225839 Monitoring Station Monitoring and Maintaining C•CURE 9000 After configuring C•CURE 9000, system operators can use the system to monitor and manage the security of your site. System administrators can use various functions available in C•CURE 9000 to adapt the system to meet new requirements as they arise. Table 19 on Page 73 lists typical tasks performed to monitor and maintain C•CURE 9000 and documentation that provides relevant guidance. Table 19: Typical Monitoring Tasks in C•CURE 9000 Task Supporting Information Create new personnel records C•CURE 9000 Personnel Configuration Guide Create clearances C•CURE 9000 Personnel Configuration Guide Create new access badges and badge layouts C•CURE ID User's Guide Create and print reports C•CURE 9000 Data Views Guide Perform system backups C•CURE 9000 System Maintenance Guide Create Groups C•CURE 9000 Software Configuration Guide Monitor system activities, events, and live video C•CURE 9000 Monitoring Station Guide Perform ManualActions (such as unlocking doors) C•CURE 9000 Monitoring Station Guide Monitoring Station Viewers The Monitoring Station user interface is based on an arrangement of up to six panes, each of which can contain multiple viewers. The Monitoring Station can also include viewers displayed in floating windows. Table 20 on Page 73 lists the types of viewers available in the Monitoring Station. Table 20: Viewers in the C•CURE 9000 Monitoring Station Viewer Description Activity The Activity Viewer tracksal system activities, such as user log on, personnel accesses, securiry object state changes, device errors. and messages. Event The Event Viewer tracks and displays all events as a list. You can dick on an event in the list to review the event and respond to it. For example, you can acknowledge the event. Object An Object Viewer displaysa specific C•CURE 9000 object that was selected when the application layout was designed. The Object is displayed in the Viewer for its object type. For example, a Map is displayed in the Map Viewer. One of the main uses for the Object Viewer is to display Video Camera Views and Tours. C•CURE 9000 Getting Started Guide Chapter 2 73 EFTA01225840 Monitoring Station Viewers in the C•CURE 9000 Monitoring Station (continued) Viewer Description Explorer Bar The Explorer Bar provides easy access to the status of selected objects in the C•CURE 9000 System.You can open status lists for each item shown in the Explorer Bar Non-Hardware. Hardware, and Video sections. You can launch externalapplications that have been configured for your system from the Externa I Applications section of the Explorer Bar. Swipe and Show The Swipe and Show Viewer displays personnel portraits when an access attempt is made at a door configured for swipe and show. Information about the activity at the Door and any related Area also displays. You can use the navigation buttons on the viewer to move backwards/forwards through recent activities. You can use the Grace Personnel button to give the displayed person access to an antipassbadcArea, whie the Grace Partition tab allows you to grace al Personnel in selected Partition(s) at one time. The information and functions available in the Monitoring Station are highly dependent on how you want to secure and monitor your site and present information to the system operators. For a detailed description of the Monitoring Station and how to adapt it to your specific requirements, see the C•CURE 9000 Monitoring Station Guide. External Applications The Monitoring Station can be configured to allow a system operator to open an external application. External applications are defined as applications not provided with C•CURE 9000. Example: You could configure the Monitoring Station to allow operators to open an e-mail application, Web browser, or a text editor. External applications are configured for the Explorer Bar when the system administrator configures the application layout in the C•CURE 9000 Administration Station. The Monitoring Station operator can then launch these applications as needed to perform tasks related to C•CURE 9000 or to supplement its functions. Manual Actions In the Monitoring Station, operators can perform manual actions on a variety of system objects. When an operator performs a manual action, a new entry appears in the Activity Viewer to log the occurrence of the manual action. 74 Chapter 2 C•CURE 9000 Getting Started Guide EFTA01225841 Client Configuration Client Configuration The C•CURE 9000 Client Configuration application allows you to connect a C•CURE 9000 client to a different C•CURE 9000 server. This application displays a single tab with one section and is accessible only from C•CURE 9000 clients. Figure 40 on Page 75 illustrates a typical C•CURE 9000 Client Configuration screen. Figure 40: C•CURE 9000 Client Configuration Application [Cericiail Caisuo0on KaI UPS Pat 0 BOS2035148 6999 CleaSttean BOS20854118 6997 Peas Poi a-dOote I When changing a server connection to a client, you must verify that the server to which you are connecting has a valid C•CURE 9000 license. For details on monitoring C•CURE 9000 licenses, see the Licensing chapter of the C•CURE 9000 Installation and Upgrade Guide or the C•CURE 9000 online help. To Change the C•CURE 9000 Client to Server Connection 1. On the Co CURE 9000 client computer, in the Windows System tray on the right side of the desktop, right-click the Administration Station icon: 2. Click Configure from the pop-up menu. The Client Configuration application opens in a separate window (see Figure 40 on Page 75). 3. On the General tab, in the Server field, enter the name of the C•CURE 9000 server to which you want to connect. 4. In the Port field, enter the number of the server port if your network requires that you use a port that is different from the default (8889). (To return to the default port connection after changing the server port designation, click the Default Port button.) 5. Click Save and Close. C•CURE 9000 Getting Started Guide Chapter 2 75 EFTA01225842 Client Configuration For additional details about managing the client to server connection, including how to change the network port used by the client, see the C• CURE 9000 System Maintenance Guide. 76 Chapter 2 C•CURE 9000 Getting Started Guide EFTA01225843 Index A Application Access external 74 Application layout 43 Administration Station 37 40 context menus 33 Areas editors 18 Audit Log 41 objects 18 finding in 60 Audit Trigger 49 Access control 13 Authenticate schedule 50 Activity Journal 41 log in 37 Authentication 37 Activity viewer 73 Adding Auto-hide pane 27 Personnel to Group, from context menu 59 Axis IP Camera 52 Administration Station 36 access 37 Backup 41 log in 37 Badge layout 48 log out 37 Badges 15 Administration Station Tasks 38 setup 41 Administrator Button partition 50 add 27 Advanced search 32 remove 27 Antipassback 40 apC C•CURE ID 41 add-on board 44 C•CURE ID Badge Designer 48 Controller 44 C•CURE Mobile 45 Door 44 Camera input board 44 Axis IP 52 input 18 board 44 CCTV 52 R48 output board 44 Intellex Video 52 apC Comm Port 43-44 Camera, CCTV 52 Ethernet connectivity 44 Card format 40 apC Controller 44 configuring 13 apC Door 44 Card Format 40 apC 132 Input Board 44 CCTV apC 18 Input Board 45 protocol 52 apC Input 45 switch 52 apC R48 Output Board 45 CCTV Camera 52 apC R8 Output Board 45 CCTV Protocol 52 apC Reader 45 C•CURE 9000 Getting Started Guide Index 77 EFTA01225844 Index CCTV Switch 52 iSTAR 46 Certificate Conventions used in this manual 8 CA 45 Creating Changing Object 54 Partition of Personnel, from context menu 60 from Template 55 CHUID Format 48 Object Template 54 Clearance 48 personnel badges 15 Custom 48 Credential 48 setting up 14 Custom Clearance 48 Client configuration 75 Customer Field Labels 41 Cluster Customer Support Center 9 iSTAR 46 Columns, adding to Dynamic View 58 Com Board Data Export 49 iSTAR 46 Data Import 41, 49 Comm Port Data Import/Export History 41 apC 44 Data views 42 ISC 45 Database Command, Keypad 40 external 49 Configuration query 43 card format 13 Deleting client 75 Personnel Record 60 door 13 Personnel View 60 elevator 14 Personnel, from context menu 59 events 14 Security Object 60 maps 15 Diagnostics readers 13 ISC 41 schedules 14 Digital Certificate 45 video 15 device controllers 43 Configuration pane 49 Document 49 Configure Door locations 39 apC 44 Configuring C•CURE 9000 16 configuring 13 ISC Context menu 32 46 iSTAR 46 Exporting to XML/CSV 61 Dynamic View 34, 43 Context menu for objects using 58 Dynamic View, adding columns to 58 Controller apC 44 Editing certificate 45 Object 56 ISC 45-46 Personnel, from context menu 59 78 Index C•CURE 9000 Getting Started Guide EFTA01225845 Index Editor 34 Filter dynamic view 43 query 43 elevator 14 search 23 ISC board 45 Filtering 32 map 43 Filtering, list of Objects 60 Multilingual UI Editor 41 Finding in Operator 49 Audit Log, from context menu 60 Output 46 Journal, from context menu 60 personnel 48 Floor 45 Reader 46 elevator control 45 report 43 groups 45 video folder 51 Floor access 14 Elevator 45 Folder configuring 14 Hardware 45 Emergency Support Hours 9 Video 52 Encryption 41 Function Encryption keys 40 buttons 25 Encryption Options 41 Ethernet connectivity 45 Group 49-50 Event 17, 49 configuring 14 management 17 Hardware Folder 45 schedule 17 Hardware pane 20, 43 time-based 49 digital certificates 43 Event Priorities 41 Holiday 49-50 Host Certificate 45 Event viewer 73 Explorer bar 73 Export 132 Input Board, apC 44 Data 49 18 Input Board definition 49 apC 45 Export History 41 Images 48 Exporting Implementation process 13 Object 61 Import selection, from context menu 59 data 49 External application 74 definition 49 F Input Fields apC 45 user-defined 48 ISC 46 Files 24 iSTAR 46 open 24 Input Board apC 44 C•CURE 9000 Getting Started Guide Index 79 EFTA01225846 Index STAR 46 Installation 15 Instant query 32 Intellex Video Camera 52 Intellex Video Server 52 Interface Administration Station 29, 36 client configuration 29 licensing 29 Monitoring Station 29 Intrusion Zone 40 SC board 45 Comm port 45 controllers 43 door 45 Input 45 reader 45 SC Board 45 ISC Comm Port 45 SC controller 45-46 SC Diagnostics 41 SC Door 46 SC Input 46 ISC Reader 46 Secure 45 STAR cluster 46 controller 46 door 46 input 46 Intrusion Zone 40 STAR ACM Board 46 STAR Cluster 43, 46 STAR cluster area 40 STAR Comm Board 46 STAR Controller 46 STAR Door 46 STAR Input 46 STAR Input Board 46 STAR Intrusion Zone 40 STAR Output board 46 STAR Reader 46 J Journal 41 Activity 41 setting up 15 Journal Trigger 50 Journal, finding in 60 K Key Smart Card 40 Keypad Command 40 Keys pane 40 L Log Backup Management 41 Log in Administration Station 37 Log in authentication 37 Log out Administration Station 37 Log Volume Management 41-42 Logging In and Logging Out 37 M Magenetic Stripe Encoding 48 Management event 17 Log Backup 41 Log Volume 41-42 object-orientend 17 Manual actions 74 Maps 43 configuring 15 Message set Reader LCD 46 MIFARE Smart Cards 40 Monitoring Station 71 external application 74 tasks 73 viewer 73 80 Index C•CURE 9000 Getting Started Guide EFTA01225847 Index Multilingual User Interface Editor 42 N Navigation pane 18, 20 hiding 27 Navigation tray 27 New Query 32 Normal Support Hours 9 0 Object access control 50 floor 45 report result 43 select 20 Object class 19 Object Template, creating 54 Object viewer 73 Objects 18 selecting 19 Operator 49-50 Privilege 49 Operator privileges setting up 14 Operator profile 37 Options and Tools 21, 41 Output 46-47 editor 46 Overview 12 P Pane areas and zones 39 auto-hide 27 card format 40 configuration 49 data views 42 hardware 43 keys 40 navigation 18-19, 27, 39 option and tools 21 options and tools 41 Personnel 47 quick search 22 video 51 Partition 31, 49-50 Partition administrator 50 Partition, changing for Personnel 60 Personal Identification Number (PIN) 13 Personnel 48 Creating an Object 54 credentials 48 deleting 59 Personnel pane 47 Personnel records categorize 48 Personnel Type 48 Personnel Views 48 PIN 13 Predefined Log Message 50 Printing list of Objects 61 Privilege 50 schedule 50 Pitx_ess implementation 13 Profile operator 37 Q Query 43 filtering 32 instant 32 predefined 32 recall 32 user-defined 32 Quick search 22, 32 R R48 Output Board apC 45 R8 Output Board apC 45 Reader apC 45 C•CURE 9000 Getting Started Guide Index 81 EFTA01225848 Index configuring 13 ISC 46 iSTAR 46 Smart Card 40 Reader LCD Message Sets 46-47 Recall Query 24, 32 Record export 49 Recurring Schedule 50 Report 43 define 15 Layout 43 Report Form 43 design 43 Report Result 43 S Schedule 50 configuring 14 privilege 50 Schedule by Time Zone 50 Search 20, 31 advanced 22,32 filtering results 23 Security object 13 Group 49 Server 75 Intellex Video 52 Setting Property, from context menu 59 Smart Cards MIFARE 40 Sorting list of Objects 61 Sound 51 Star Coupler 47 Ministar 47 WPSC 47 Status screen 33 Swipe and Show viewer 73 System installation 15 System Backup 41-42 System Variables 41-42 T Tab open 24 Telephone Technical Support 9 Template, creating object from 55 Templates for security objects 33 Time Zone 50-51 Tour Video 52 Trigger Audit 49 Journal 50 U User-defined fields 48, 51 User Interface Editor Multilingual 42 Using context menu for objects 58 V Variables System 41-42 Video configuring 15 Video Camera Intellex 52 Video Folder 52 Video pane 51 Video Server Intellex 52 Video Tour 52 Video View 52 View Dynamic 34 Video 52 Viewer activity 73 event 73 Monitoring Station 73 object 73 82 Index C•CURE 9000 Getting Started Guide EFTA01225849 Index swipe and show 73 Visitor Management 48 w Wiegand Proximity Star coupler 47 z Zone secure 39 Zone, iSTAR Intrusion 40 C•CURE 9000 Getting Started Guide Index 83 EFTA01225850 Index 84 Index C•CURE 9000 Getting Started Guide EFTA01225851