PCMonitor.ini Specification (CONFIG] TestTimes=6 IntervalTime=2 RetryTimes=2 ProjectName=Y920 [FAN1j Enable=True MinSpeed=800 MaxSpeed=2500 (FAN2] Enable=True MinSpeed=800 MaxSpeed=2500 (FAN3] Enable=True MinSpeed=800 MaxSpeed=2500 (FAN4] Enable=True MinSpeed=800 MaxSpeed=2500 [FANS] Enable=True MinSpeed=800 MaxSpeed=2500 Enable=True MinTemp=20 MaxTemp=80 (TEM2] Enable=True MinTemp=20 MaxTemp=80 (TEM3] Enable=True MinTemp=20 MaxTemp=80 //The times of need to test. This value must be greater than the value of RetryTimes. //The interval time of reading the fan speed and the temperature value(Unit is 0.15). //The retry times of failed testing //The name of project //If support the CPU Fan, the enable is true, otherwise it should be false. //The minimum value of CPU Fan speed. //The maximum value of CPU Fan speed. //The minimum value of temperature 1. //The maximum value of temperature 2. The Return Value Specification Bit7 (011) Bit6 (OW TEM3 TEM2 Bit5 (011) bit4 (011) TEM1 FANS bit3 (011) bit2 (OM FAN4 FAN3 bitl (011) bit0 (011) FAN2 FAN1 For example: If all test items are failed, the return value is 11111111. The decimal number of return value is 255. If test result is pass, the return value is 00000000. The decimal number of return value is 0. EFTA01219699